OEM Alpine White Parts: Front Bumper, Impact Bar, Front Fenders (Rolled), PDC,Wheels
Thread Starter
Members
Senior Members
Joined: Feb 2008
Posts: 901
Likes: 16
From: San Diego
My Ride: E61 with all the mods
Model Year: 2008
Engine: N54
Hello Gentlemen,
If you have seen my other threads then you are aware I did on oem M5 front end conversion. Finally I am getting around to selling my oem parts to free up some room in the garage. Parts are off my 535xi E61 and include my oem fenders and style 243 wheels.
Items are located in Milpitas, Ca. I am not looking to ship at this time. Prices are obo but I feel they are fair based off condition and current market values.
Email evanpatak@gmail.com
Fenders: $200/ea or both for $350
Wheels + Tires: $450
Evan
Fenders
They have been rolled and slightly pulled by Fendarolla, check out his other work here: https://www.facebook.com/pages/Fenda...45063652270144
I fit some 19x9.5" et32 Miro 111s with Hankook 255/40/19 tires on my xi; these fenders allow much greater clearance over standard oem units.
There is no paint flaking or chipping and there has hardly any rubbing contact at all.
Once small indentation on the bottom of the passenger fender and a small chip under the driver side marker , they are hard to see but I did my best to photograph them; some very minor blemishes but fenders are in very good/excellent condition. They are hanging in my garage, washed, and ready for pick up.









STYLE 243 Wheels
OEM BMW Style 243
17x7.5 et43
New Yokohama YK580 225/50/17 (essentially new <300 miles)
No TPMS
Miro center caps
Some blemishes, please see photos







[IMG]https://lh6.googleusercontent.com/-DjON
h0yTOfc/U7rQ_sN2H8I/AAAAAAAAESw/9ODs0QIwId0/w1146-h860
-no/IMG_2688.JPG[/IMG]
If you have seen my other threads then you are aware I did on oem M5 front end conversion. Finally I am getting around to selling my oem parts to free up some room in the garage. Parts are off my 535xi E61 and include my oem fenders and style 243 wheels.
Items are located in Milpitas, Ca. I am not looking to ship at this time. Prices are obo but I feel they are fair based off condition and current market values.
Email evanpatak@gmail.com
Fenders: $200/ea or both for $350
Wheels + Tires: $450
Evan
Fenders
They have been rolled and slightly pulled by Fendarolla, check out his other work here: https://www.facebook.com/pages/Fenda...45063652270144
I fit some 19x9.5" et32 Miro 111s with Hankook 255/40/19 tires on my xi; these fenders allow much greater clearance over standard oem units.
There is no paint flaking or chipping and there has hardly any rubbing contact at all.
Once small indentation on the bottom of the passenger fender and a small chip under the driver side marker , they are hard to see but I did my best to photograph them; some very minor blemishes but fenders are in very good/excellent condition. They are hanging in my garage, washed, and ready for pick up.
STYLE 243 Wheels
OEM BMW Style 243
17x7.5 et43
New Yokohama YK580 225/50/17 (essentially new <300 miles)
No TPMS
Miro center caps
Some blemishes, please see photos
[IMG]https://lh6.googleusercontent.com/-DjON
Last edited by ucsbwsr; Oct 23, 2014 at 06:54 AM.
Contributors
Joined: Sep 2008
Posts: 2,341
Likes: 0
From: SFV California
My Ride: 2006 530i Alpine White on Black interior, Sport and Premium Package, Steptronic, Navigation, Xenon Adaptive Headlights, Mtec V2.1 angel eyes,Hoen Fog Lights, Full M-Tech kit, ACS pedals, LED plate lights, CF Steering Wheel badge, CF Titanium trim, OE
Thanks Evan!!!


