Guys,

I spoke to Eloy this afternoon --great guy :thumbsup: .

He needs a a few V8 volunteers located in SoCal and willing to get fitted with the RPI scoop. He simply needs to know if it will fit as is, or if modifications are necessary. I know there's nation-wide interest in this, but I'm located in Texas, and it's too far to drive for me. :|

So I was wondering if I can have 3 volunteers:

• pre-LCI 545i
• pre-LCI 550i
• LCI 550i

All Eloy needs to do is test fit the RPI scoop. Btw, he's willing to offer a nice discount to the first volunteer for each V8 model. :)

I would really appreciate your help. Please PM me if you're available and interested. :help:

I'll go ahead and start out a list of interested V8 folks (In case it works out for us):

1. mrfva
2. [name]
3. [name]
4. [name]
5. [name]
6. [name]
7. [name]
8. [name]
9. [name]

what exactly is the rpi scoop? what does it claim to do?

Dibs on LCI 550i, count me in

Add me to the interested list Frank. BTW, quit being lazy and drive out there and get your 545 fitted! :P

Thanks guys, added you to the list.

John, you're probably closer. I think you should go. :P

...

I'll go ahead and start out a list of interested V8 folks (In case it works out for us):

1. mrfva
2. aznunknownx
3. DRANGED
4. [name]
5. [name]
6. [name]
7. [name]
8. [name]
9. [name]

...

how much of a discount?

I have an 05' 545 and I can go to RPI for fitment, the last time i spoke to him he wanted to have the car there for a couple of days which i am not able to do at this time. But i can be at RPI the whole day if he required. Let me know frank.

1. mrfva
2. aznunknownx
3. DRANGED
4. navin
5. [name]
6. [name]
7. [name]
8. [name]
9. [name]

Here's the interest list from a previous thread that was started for the scoops for the V8s,
Link to previous thread here

1. advancedlogic
2. Rizbel
3. mrfva
4. jdhart73
5. GQuK545i
6. pentiumpush
7. tranman329 (550)
8. brabusw209amg
9. navin
10. flyingpuck
11. Hyper_545i
12. bleudyno
13. Brit_in_NJ
14. DKNewYork
15.Ahsan

do they accept Canadians too?

Thanks navin, I believe this time around he simply needs the car for fitment, but I'll double-check for you.

Thanks navin. I've updated the list below ...

Link to previous thread here

i have these RPI scoops and it really kicks in top end! Eloy is top notch guy to deal with, no doubt!

Michael (myfootsmells) - do yourself a favor and go to RPI for fitment, i'll even go with you to hold your hand!!lol

https://i257.photobucket.com/albums/...p_hzimara2.jpg

Come'n Michael, do it for the group! :D :P

I have an 05, 545 (pre-LCI).
I'm in South Florida though, Not sure if it'll work for them.
If so, I'm down.

I'm interested in purchasing once it's finished as well =P
How much do you think it'll cost rougly?

I'll do it. Long as i'm out of there in couple hours. :)
08 LCI 550i

Great! So far, I've got:

• navin - 545i
• FLY550i - LCI 550i
• ??? - Pre-LCI 550i

Thanks Guys! One more volunteer needed. I'll give RPI a ring tomorrow to find out more details. I'll keep you posted.

i still have my certificate for a free scoop from the central cali meet. If someone can get this fitted i can pick up from eloy.

Weren't YOU supposed to have been the prototype for the 545i? :rolleyes:

i so would....if i had a V8 =[

+1

http://www.raceprecision.com/forums/viewtopic.php?t=119

..?

-frank

A ram-air intake causes the dynamic air pressure created by vehicle motion to increase the static air pressure inside of the intake manifold on an engine, thus allowing a greater massflow through the engine and hence increasing engine power :devil:

The ram air intake (rpi scoop + air intake) works by reducing the intake air velocity by increasing the cross sectional area of the intake ducting. When gas velocity goes down the dynamic pressure is reduced while the static pressure is increased. The increased static pressure in the plenum chamber(A chamber, located between the throttle body and the runners of an intake manifold, used to distribute the intake charge evenly and to enhance engine breathing.) has a positive effect on engine power, both because of the pressure itself and the increased air density this higher pressure gives.

:geek:

*ahem* :D

Navin and FLY550i -- I just spoke to Eloy with RPI. All he needs to do is look at the car to see if it fits; this will take no more than 5 minutes. If he notices that there's a slight difference, he may need the car 1 hr. at most, for further measurements. I'll PM you additional details. :)

We still need a pre-LCI 550i. :help:

For everyone who's interested in this purchase round, it will be $100 for the RPI scoop (our cars only need one). Keep in mind that RPI normally sells the Z4 scoop for $129. This is a great deal for us v8 owners. :thumbsup:

For those who are still interested, please updated the list with your v8 model and if it's a 550i (pre or LCI model),

• mrfva - 545i
• aznunknownx
• DRANGED - pre-LCI 550i
• navin
• Khooger
• advancedlogic
• Rizbel
• jdhart73
• GQuK545i
• pentiumpush
• tranman329 (550)
• brabusw209amg
• flyingpuck
• Hyper_545i
• bleudyno
• Brit_in_NJ
• DKNewYork
• Ahsan
• ShadeZeRO

thanks!

Everyone jump on this!

https://i252.photobucket.com/albums/...rbybrandon.jpg

I am going to RPI tomorrow morning at 9:30 for fitment :D , will keep you guys updated on the outcome.
Thanks Frank for getting this going :)

Thanks navin! We're looking forward to it :)

Where's the love for LCI 535i owners?

Hey MacFly, do they have scoops available for our cars already? Did Eloy custom fit yours?

sure do! i've had it since Aug, kicks in top end above 5k.

http://forums.e60.net/index.php?showtopic=...mp;#entry683093

Not sure which model you have, PM Macfly (535i) or Nerweezy (530i) for more details about their RPI scoops. :thumbsup:

I will call Eloy tomorrow to set up for mon or tues. :)
Sorry, pretty busy this week!
Tom

Alright guys, just got back from RPI, The scoop from the M5 fits perfectly for the 545 :D
Got mine put in while i was there and took the longer way back to work :devil: ,
There is definitely some difference after 50mph on the freeway and once you cross 70 the throttle response is completely different from before.
Also one thing i noticed was that it was holding the rpms better after 70mph
and if you shift down like calton mentioned make sure you have open road ahead of you because it just takes off.
I have to get a V1 now :cry:

Eloy is giving 40% off for the test fitters and he said the 545 single scoop will be up on the website for $99

if it's not too late i can do it even leave my car there for a couple days if necessary.

you are late by 1hr :P , the 545 test fit has been completed.

oh well. :)

You have a picture of it attached?