••ü•• Inquiry (Mtech E60 Bumper)
#1
Former Vendor
Thread Starter
How many people on here would be interested in a front Mtechnik Replica bumper for $350?
http://www.umnitza.com/product_info....oducts_id=1244
http://www.umnitza.com/product_info....oducts_id=1244
#2
Super Moderator
Join Date: Jan 2008
Location: So. Cal (SFV)
Posts: 17,508
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2011.5 Alpine White E90 M3 | Black Novillo Leather | Carbon Fiber Leather Trim | ZCP | ZP2 | M-DCT | Navigation | Moonroof | 6FL Mods: TMS 12.5mm spacers all around l Hawk HPS Brake Pads l OEM M3 Edition Grills l Paint Matched Side Gills l Key Hole D
A little more info might help further your inquiry....
Such as type of material used?
Such as type of material used?
#3
Former Vendor
Thread Starter
The material is PolyPropylene - not fiberglass.
We have a photo on the site, a link has been added to the first post.
http://www.umnitza.com/product_info....oducts_id=1244
We have a photo on the site, a link has been added to the first post.
http://www.umnitza.com/product_info....oducts_id=1244
#6
Former Vendor
Thread Starter
Originally Posted by siu0410' post='704149' date='Oct 26 2008, 07:31 PM
brake ducts wont be availiable? does this mean i would need to buy them to fit it on? how much is it?
It's a dealer only item.
----
If you currently have Fogs, it should work with them. PDC units will simply need to be drilled out and mounted, currently, we're only ordering bumpers without PDC (since it's easy for any body shop to punch out those holes).
#9
Contributors
Join Date: Aug 2006
Location: Orange County, Ca
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 530i
Originally Posted by umnitza' post='704163' date='Oct 26 2008, 07:52 PM
The brake ducts will need to be purchased separately if you want them.
It's a dealer only item.
----
If you currently have Fogs, it should work with them. PDC units will simply need to be drilled out and mounted, currently, we're only ordering bumpers without PDC (since it's easy for any body shop to punch out those holes).
It's a dealer only item.
----
If you currently have Fogs, it should work with them. PDC units will simply need to be drilled out and mounted, currently, we're only ordering bumpers without PDC (since it's easy for any body shop to punch out those holes).