E61 Project
04-08-2010 | 02:21 AM
#11
Members
Joined: Dec 2009
Posts: 30
Likes: 0
The ET value on the rear wheels are 20mm. The wheel sticks out about 15mm. I had to make some changes to get the wheel further into the body. When I was doing my research on wheel specs, I used an E60 as the temp plate. I wasn?t able to find E61 specs on wheeltrack. Much to my surprise there is a difference between the E60 and E61. It?s all corrected now.
04-08-2010 | 09:58 AM
#12
Contributors
Joined: May 2009
Posts: 150
Likes: 0
From: Montreal, Canada
My Ride: 06' 530xi E61 Saphire Black / Dakota Black - aluminum
11' A4 Avant 2.0T Brilliant Black / Black - aluminum
Very nice looking drop!
After installing 19's as well I too feel a drop is needed to make it look right. Did you order the 29146.2 kit for your car? If you did does the kit consist of 2 front springs only or does it come with rear brackets also?
After installing 19's as well I too feel a drop is needed to make it look right. Did you order the 29146.2 kit for your car? If you did does the kit consist of 2 front springs only or does it come with rear brackets also?
04-08-2010 | 05:22 PM
#13
Thread Starter
Members
Joined: Jan 2010
Posts: 48
Likes: 0
From: Toronto
My Ride: 2006 E61 530xi
Yes. The H&R kit I installed is the 29146.2. The kit consists of only two front springs. I lowered the rear suspension with a scan tool.
Thread
Thread Starter
Forum
Replies
Last Post