Don't install Stoptech BBK
Thread Starter
Members
Joined: Mar 2008
Posts: 56
Likes: 0
From: Luxembourg
Hi,
This message just to inform people that want to put a BBK on their M5.
I have installed Stoptech BBK in March 2009.
After 2000 miles the Disks were worned, not even been to the track.
So i have contacted Stoptech but they said it was not possible to worn the disks.
I have ordered a new set of disks because it was impossible to drive the car.
I have used them for 1000 miles, last friday i went to the track and it happened again.
The disks are worn again.
So if people want to put a BBK ,
DON't DO STOPTECH.....
This message just to inform people that want to put a BBK on their M5.
I have installed Stoptech BBK in March 2009.
After 2000 miles the Disks were worned, not even been to the track.
So i have contacted Stoptech but they said it was not possible to worn the disks.
I have ordered a new set of disks because it was impossible to drive the car.
I have used them for 1000 miles, last friday i went to the track and it happened again.
The disks are worn again.
So if people want to put a BBK ,
DON't DO STOPTECH.....
Contributors
Joined: Sep 2007
Posts: 8,199
Likes: 0
From: .
My Ride: .
Model Year: .
Originally Posted by EuroCarFan' post='1032374' date='Oct 14 2009, 03:28 PM
Very surprising to hear considering they're a very reputable company. Sorry about your troubles. What did StopTech say after this second occurrence?
Contributors
Joined: Sep 2007
Posts: 8,199
Likes: 0
From: .
My Ride: .
Model Year: .
Thread Starter
Members
Joined: Mar 2008
Posts: 56
Likes: 0
From: Luxembourg
Guys,
I have already resurfaced the first pair after they were worned the first time.
After 500 miles the same crap.
I have red all the articles of Stoptech but what they put in there articles is really funny.
Worned disk is not possible and that it is just stuff of the pads on the disks.
The problem is that the disks are not that good and that the 6 pot calibers are too strong for the disks they make.
I can assure you that the disks are not that good of quality otherwise it is not possible to worn 2 pairs of disks in 5000 miles.
Even following the instructions very carefully of the bedding in and braking in.
APRacing is ordered so if someone want to have the calibers of Stoptech, you can for 500 euro.
Filip
I have already resurfaced the first pair after they were worned the first time.
After 500 miles the same crap.
I have red all the articles of Stoptech but what they put in there articles is really funny.
Worned disk is not possible and that it is just stuff of the pads on the disks.
The problem is that the disks are not that good and that the 6 pot calibers are too strong for the disks they make.
I can assure you that the disks are not that good of quality otherwise it is not possible to worn 2 pairs of disks in 5000 miles.
Even following the instructions very carefully of the bedding in and braking in.
APRacing is ordered so if someone want to have the calibers of Stoptech, you can for 500 euro.
Filip
Members
Joined: Jan 2009
Posts: 23
Likes: 0
Originally Posted by Filip535D' post='1033242' date='Oct 15 2009, 08:15 PM
APRacing is ordered so if someone want to have the calibers of Stoptech, you can for 500 euro.
Filip
Filip
Senior Members
Joined: Jul 2009
Posts: 549
Likes: 0
From: Bahrain
My Ride: 2006 E60 M5 (Sepang Bronze/Natural Brown)
Eisenmann Exhaust with Miesterchaft Sections 1 & 2
Evosport Headers
Evosport Pulley
RPi Scoops & Block Off Plates with BMC Filters
Eibach Pro-Kit Springs
20" Breyton Race CS in Polished Silver
Guess I'm gonna go for Brembos. Anyone selling theirs?
Senior Members
Joined: Oct 2008
Posts: 763
Likes: 0
From: London, ON
Are brake/disk replacements really necessary? Im still on the original setup, and until worn out not looking to replace or upgrade. Is there really a neeeeeed to replace the BMW setup with brembos or BBK like people have?
Just curious to why the upgrade... strickly preformance based, or is it because to replace my stock setup with new stock parts when worn is the same price???
THanks
Aartsy
Just curious to why the upgrade... strickly preformance based, or is it because to replace my stock setup with new stock parts when worn is the same price???
THanks
Aartsy
Thread Starter
Members
Joined: Mar 2008
Posts: 56
Likes: 0
From: Luxembourg
Hi,
It's just for the track when you will need this or when you often drive full speed.
Most people will change it for the look.
The price for Pads front and rear are approx. 500$ and the discs front and rear are approx. 750$
A BBK kit will cost you around 3000 $.
So you can replace it but if you not use is at the edge it's not needed.
I have now new discs in warranty from stoptech, so Calibers and Discs you can buy here.
Please Pm for more info.
Filip
It's just for the track when you will need this or when you often drive full speed.
Most people will change it for the look.
The price for Pads front and rear are approx. 500$ and the discs front and rear are approx. 750$
A BBK kit will cost you around 3000 $.
So you can replace it but if you not use is at the edge it's not needed.
I have now new discs in warranty from stoptech, so Calibers and Discs you can buy here.
Please Pm for more info.
Filip
Thread
Thread Starter
Forum
Replies
Last Post
socale39
Complete Car Sales
9
Sep 5, 2023 08:30 AM
umnitza
E60, E61 Parts, Accessories and Mods
6
Jun 23, 2015 03:41 PM
DetailersDomain
Detailing Forum
0
May 29, 2015 04:52 AM
snaprolll
DIY: Do It Yourself
0
May 5, 2015 05:09 PM