IndyRedBeast

Ok guys so as some of you may know a container of Miro 111's in all sizes has arrived. I'm getting my set of 20" Miro 111 in Silver/Machined Faced Staggered fitment soon. I have been on a waiting list for over a month now. Placing an order tommorow. So the time has come to ask my question.

Here are the specs of the rims and tires im getting:

FRONT 20x8.5 ET18 & REAR 20x9.5 ET18

Hankook Evo V12's
OR 255/35/20 Front & 285/30/20 Rear
Falken 452's


My question to you guys is that i'd want to achieve an aggressive flush look with these rims.
So im thinking of adding spacers all around. But i worry i will get rubbing issues.
I am also lowered on Eibach Springs. I was told that i can run a 10-12mm Spacer for the front
But did not find any info for the rear. Can you guys please help me out. I really want it to look good.

JOHN

12-15mm in the front would be fine but the rears will be flush as is. Stock rear is +28. I have 12.5mm spacers on the rear bringing it down to 15.5 effective offset. I had 15mm spacers, but they rubbed. If you wanna put on on 3mm spacers you can, but its not going to make a huge difference in appearance.

IndyRedBeast

I currently run 12mm H&R spacers all around on my stock rims. So i can probably reuse a set for the front. But its really the rear im considered about. i want the rear to be flush and have an aggressive look too. I was also told i can roll my fenders but i dont really want to that and damage anything.

JOHN

No, you don't need to roll fenders. You'll be flush at +18 especially on 20's

IndyRedBeast

ok great but will it have an agressive look? I know by what you mean flush with the fenders but i even want to push out a bit more. Currently on my stock 19's running 12mm in the back is flush with the fenders but not really agressive. Like i said the fronts i dont really care about i'll just slap on the 12mm spacers and thats it. A vendor told me that i can run 5mm spacer in the back MAX after that im gonna have to roll my fenders. Will it make a difference?

alfy007

I have a question about staggered and non staggered offset for the Miro 111 in 20".

I have a non sport 530.
The standard offset is ET18 for front and back.

What if I wanted to have a non staggered set up with 20x8.5 all around?

Will the offset for the rear rim change?

Persian_535i

Sorry I stopped reading at the point where you said non staggered set up

IndyRedBeast

Getting mine installed now!!!

alfy007

Pics,Pics, Pics!

toyota2bmw

I actually saw these over the weekend on the Miro demo car driving around in my neighborhood in the rain. It looked very nice even with all the rain and dirt. The concavity of the wheels are much more appreciated when seen in person. for the Miro 11s! Nice choice.