saw a set of bbs rgr for $2000 but 32 offset
i was looking for 19x8.5 and 35 offset

need to make sure the fitment before i jump on it
anyone know 32 offset will fit the front or not? i think the rear will be ok for 8.5

 

worst case - you'll have to roll fenders. I say go for it

 

The rears should be fine but the fronts are most likely going to be poking.

 

This is your best friend as you search for new wheels. Learn it, book mark it, know it!

http://www.1010tires.com/wheeloffsetcalculator.asp

You're welcome.

 

my rear VB3's are 19x8.5 ET 45 w/ 12.5mm spacers making them really a 32.5 ET and they fit fine.

 

Actually, NOT likely - Calton had 19x8.5 fronts with ET40 and 10mm spacers (effectively, ET30 offset) - he reported no issues.

 

I agree. I have 19x8.5 ET 35 for my fronts, and there's still a little room to play. it'll be close, but my *GUESS* (i.e. don't hold be to it) is that it would fit.

Good luck.

 

Your rears should be 9.5, not 8.5, if you do staggered with 12mm spacers in the rear.

 

It will be fine.

 

If he wants to do a square setup, then ET32 all around would be fine. Even with room for a thin spacer in the rear.