Umnitza Quad Exhaust
#1
Members
Thread Starter
Join Date: Jun 2010
Location: DFW Area
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2011 Lexus IS-F
Well, I decided to try this setup and got it installed today. Here are a couple of shots on how it looks. All in all, with the price considered, this was a good value and I think it looks good. The sound is a tad deeper than stock and no droning what so ever. The installer had to play with the right side a tad to get it away from the left side of the bumper. The bumper is an OEM M5 bumper. I was really surprised how easy the bumpers are to take off and put on, 30 minutes off and 30 minutes on. The wheel well screws slow you down :-). The muffler shop charged me 150, bumper was 600 and painting it was 400 :-(. Not too bad of an expense. The tips stick out a tad, but considering the price, I'll accept it.
#3
Contributors
Join Date: Dec 2008
Location: dallas, tx
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: e60
i got the same exhaust but on a reg oem bumper
i like the subtle note it produces over stock but maybe removing the resonator just to hear the difference
im also planning to switch the tips soon
i like the subtle note it produces over stock but maybe removing the resonator just to hear the difference
im also planning to switch the tips soon
#4
Members
Thread Starter
Join Date: Jun 2010
Location: DFW Area
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2011 Lexus IS-F
Thanks
#5
Contributors
Join Date: Dec 2008
Location: dallas, tx
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: e60
i took it to 2 places
brothers and aa mufflers
brothers installed it... aa tried to put on the tips, i say try cause they couldnt do it without readjusting the pipes and it was too late
so now im gonna go to a bigger place and have new piping bent and installed so the can can mount a lil further in allowing for the tips to be more flush
this exhaust wasnt made for reg bumpers so this is needed for mine
im going to put on 3.5" oval tips in the rear
brothers and aa mufflers
brothers installed it... aa tried to put on the tips, i say try cause they couldnt do it without readjusting the pipes and it was too late
so now im gonna go to a bigger place and have new piping bent and installed so the can can mount a lil further in allowing for the tips to be more flush
this exhaust wasnt made for reg bumpers so this is needed for mine
im going to put on 3.5" oval tips in the rear
#7
Members
Thread Starter
Join Date: Jun 2010
Location: DFW Area
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2011 Lexus IS-F
There are 4 screws that literally attach the apron to the bumper. They are right by the tail lights on each side (2 per side). Then you have the small 4 screws in each well, that will turn to 3 when installing the oem m5 bumper and that is it! It really amazed me how simple it was. Nothing at all like the front...