Sub install, ACS spoiler arrived today - installing tomorrow.
#1
Contributors
Thread Starter
Join Date: Mar 2009
Location: Nebraska
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Ok i got the car done today. Overall its ok. I kind of want more but it doesnt rattle one bit. I went in and picked up the car and the guy gave me money back on the isntal. He didnt use all the wires and gave me 12 dollars back. Not much but then after i left i realized they forgot/didnt charge me for the box. So after the refund and missed charge everything cost me under $200. Amp is on the back of the box and the box is bolted down from the inside. Here are the sub pic's.
^ nice clean, not to flashy, and not taking up the entire trunk.
Spoiler pics, not installed yet. Tomorrow when its hot im going to do it.
I got this spoiler from menace e60. He didnt sand the bottom when he installed it. Should i sand it and just use super strength 3m double sided tape? I dont know which silicone to get so i dont think im going to even use any. I did read the diy but just wanted some personal feedback from anyone who has done this and hasnt use silicone. I checked the fitment and its pretty good. You have to apply some pressure at the ends but thats expected.
^ nice clean, not to flashy, and not taking up the entire trunk.
Spoiler pics, not installed yet. Tomorrow when its hot im going to do it.
I got this spoiler from menace e60. He didnt sand the bottom when he installed it. Should i sand it and just use super strength 3m double sided tape? I dont know which silicone to get so i dont think im going to even use any. I did read the diy but just wanted some personal feedback from anyone who has done this and hasnt use silicone. I checked the fitment and its pretty good. You have to apply some pressure at the ends but thats expected.
#3
Contributors
Thread Starter
Join Date: Mar 2009
Location: Nebraska
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by myfootsmells' post='873003' date='May 8 2009, 08:37 PM
could try turning up the gain dial
#4
Contributors
Join Date: Sep 2008
Location: Los Angeles
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 530i
87 325is
85 VW GTI
Interesting install. The audio components in the trunk are all on the drivers side but the wire comes down from the passenger side. And all the power is on the passenger side but wires are coming from the drivers side. I would have just flipped the amp.
#6
Contributors
Join Date: Sep 2008
Location: Los Angeles
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 530i
87 325is
85 VW GTI
Originally Posted by aresh' post='873054' date='May 8 2009, 07:34 PM
why didint you buy earthquake 8sws subs and make them run the amp to those? i was going to do that but the total cost was $530
Cause she got the woofer and box for freee
#8
Contributors
Join Date: Feb 2009
Location: Irvine, CA
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Titanium Gray 550i, Cold Weather Package, Premium Sound Package, Sport Package, Shadowline trim, Parking Distance Conrol, Xenon, Adaptive Headlight Control, Navigation System, Satellite
Originally Posted by Alpine White Girl' post='873001' date='May 8 2009, 09:35 PM
Ok i got the car done today. Overall its ok. I kind of want more but it doesnt rattle one bit. I went in and picked up the car and the guy gave me money back on the isntal. He didnt use all the wires and gave me 12 dollars back. Not much but then after i left i realized they forgot/didnt charge me for the box. So after the refund and missed charge everything cost me under $200. Amp is on the back of the box and the box is bolted down from the inside. Here are the sub pic's.
Attachment 78993
Attachment 78994
Attachment 78995
^ nice clean, not to flashy, and not taking up the entire trunk.
Spoiler pics, not installed yet. Tomorrow when its hot im going to do it.
Attachment 78996
Attachment 78997
I got this spoiler from menace e60. He didnt sand the bottom when he installed it. Should i sand it and just use super strength 3m double sided tape? I dont know which silicone to get so i dont think im going to even use any. I did read the diy but just wanted some personal feedback from anyone who has done this and hasnt use silicone. I checked the fitment and its pretty good. You have to apply some pressure at the ends but thats expected.
Attachment 78993
Attachment 78994
Attachment 78995
^ nice clean, not to flashy, and not taking up the entire trunk.
Spoiler pics, not installed yet. Tomorrow when its hot im going to do it.
Attachment 78996
Attachment 78997
I got this spoiler from menace e60. He didnt sand the bottom when he installed it. Should i sand it and just use super strength 3m double sided tape? I dont know which silicone to get so i dont think im going to even use any. I did read the diy but just wanted some personal feedback from anyone who has done this and hasnt use silicone. I checked the fitment and its pretty good. You have to apply some pressure at the ends but thats expected.
I want a spoiler too I saw this at Ebay for $120. What do you think?
#10
Contributors
Thread Starter
Join Date: Mar 2009
Location: Nebraska
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MENACE_E60' post='873458' date='May 9 2009, 09:21 AM
AWG good to see you got the spoiler. Yeah i just used the 3m tape to mount and didn't have any problems.