Sprint Booster install - Engine Malfunction
#1
Contributors
Thread Starter
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Ok I installed my SB matched up all of the pins and get the error message. I remove the whole thing and plug in the OEM cable and it is still there!!
Can someone please help?
And yes I searched and I looked through the 2 topics but nothing helpful.
Can someone please help?
And yes I searched and I looked through the 2 topics but nothing helpful.
#2
Senior Members
Join Date: Jan 2007
Location: NJ, USA
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 525i, Premium,Cold,Xenon Packages
Engine malfunction means two things:
1) you put the plug in reverse, it goes either side. Need to watch the holes correctly. (I had this problem, freaked me out lol.)
or
2) the unit is bad and need replacement.
1) you put the plug in reverse, it goes either side. Need to watch the holes correctly. (I had this problem, freaked me out lol.)
or
2) the unit is bad and need replacement.
#3
Contributors
Thread Starter
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by coolguy' post='781978' date='Jan 31 2009, 06:10 PM
Engine malfunction means two things:
1) you put the plug in reverse, it goes either side. Need to watch the holes correctly. (I had this problem, freaked me out lol.)
or
2) the unit is bad and need replacement.
1) you put the plug in reverse, it goes either side. Need to watch the holes correctly. (I had this problem, freaked me out lol.)
or
2) the unit is bad and need replacement.
#5
Super Moderator
Join Date: Jan 2008
Location: So. Cal (SFV)
Posts: 17,508
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2011.5 Alpine White E90 M3 | Black Novillo Leather | Carbon Fiber Leather Trim | ZCP | ZP2 | M-DCT | Navigation | Moonroof | 6FL Mods: TMS 12.5mm spacers all around l Hawk HPS Brake Pads l OEM M3 Edition Grills l Paint Matched Side Gills l Key Hole D
member too_solid had a similar experience with his SB install..
http://forums.e60.net/index.php?showtopic=58392&st=0
members chimed in with some good ideas in that thread as well...GL
http://forums.e60.net/index.php?showtopic=58392&st=0
members chimed in with some good ideas in that thread as well...GL
#6
Contributors
Thread Starter
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Ok thanks. I am going to try driving the car for 50 some miles and see if the error goes away. And I am going to get a replacement from Andy.
#7
Contributors
Thread Starter
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
I went to Advance Auto Parts and they had a OBD II there so they just cleared the fault
#9
Contributors
Join Date: May 2008
Location: San Antonio, TX
Posts: 5,895
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 04 525i, 04 Dinan M3
You can just take it out, start it as normal, stop the car and try to reapply it. Same thing happend to me when I first got it.
#10
Contributors
Thread Starter
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tex_phil' post='782557' date='Feb 1 2009, 04:02 PM
You can just take it out, start it as normal, stop the car and try to reapply it. Same thing happend to me when I first got it.