|
I have a Question please and would most grateful for any help please ?
I want to fit wheel only, I have a 3/2009 wheel same as the picture for Kleynie which I plan to fit to 2006 E60 From what I have read :- 1) Install 1 wire on pin 12 of SZL connector (X1880) and run to ground 2) Install 1 wire on pin 13 of SZL connector (X1880) and run to connector X6031 in ebox to pin 11 I am un sure if coding is required for paddle wheel only ? |
If you have a pre-LCI E60, then the instructions for retrofitting a paddle wheel will be different that on this thread. This thread only applies to LCI E60's with the electronic (GWS) shifter. As far as I know, LCI is MY2008 and later.
On a happy note, I think it's actually easier to get paddle-shifting working on the pre-LCI models (ie. no coding required). |
Thanks for such a fast reply, I am having a bit of trouble looking for a definitive Pre LCI retro fit thread, any leads ?
Thanks again :clap: |
Any E60 on or after 03/07 is LCI.
|
Originally Posted by Ozi5Msport
(Post 1436204)
Thanks for such a fast reply, I am having a bit of trouble looking for a definitive Pre LCI retro fit thread, any leads ?
Thanks again :clap: |
Originally Posted by NoQuarter
(Post 1434585)
Yes the paddles can be "turned off" via coding. If this is not done, the SAT sees it as an error when it does not detect the paddles as present and goes into a sort of "safe mode" and won't let the shifter stay in manual shift mode.
ok so I put everything I had in bmw code and I do the coding without the paddles on the steering wheel because mine does not have the paddles on the steering wheel right Once everything comes out the message encoded in the sports context? in most is not that the steering wheel becomes harder once codified all |
Originally Posted by italy530
(Post 1437928)
ok so I put everything I had in bmw code and I do the coding without the paddles on the steering wheel because mine does not have the paddles on the steering wheel right
Once everything comes out the message encoded in the sports context? in most is not that the steering wheel becomes harder once codified all |
As given by kbimmer these parameters in KGM controls heavy steering:
GESCHWIN_WERTE_SPORT_KGM wert_01 STROMWERTE_SPORT_KGM wert_01 Also just to let you guys know SAT retrofit isn't fully operational until SAT version software is flashed onto the gearbox ecu (GKE). |
Notice SAT Coding :
EGS update with Zusb 7592130 for complete coding ! |
hello I installed everything but can not encode the bmw sports gearbox why?
Also now when I press the sport button on the steering wheel becomes harder |
| All times are GMT -8. The time now is 12:24 AM. |
© 2026 MH Sub I, LLC dba Internet Brands