Reset idrive after brake pad change
#1
Members
Thread Starter
Join Date: Aug 2008
Location: South Wales, UK
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 520d SE 163bhp, Saloon, Grey, no factory fit extras, no mods. (yet...).
Folks,
I am planing on changing my fron brake discs and pads and need some advice on re-setting the service interval on the i drive.
I have seen varous threads on sticking the key in and pressing the odometer for 5-10 secs until SRVICE comes up the scrolling through.
I have tried this - and this is what i get.
1. Put key to position 2 (but do not press start button).
2. Press and hold odometer re-set button.
3. After approx 5 seconds a triangle (orange) appears, then disappears.
4. After approx 10 secs I get some info appear e.g 01.00 FGSTNR XP70449.
5. If I scroll through I get 8 messages from 01.00 - 01.08.
At no time do I get the 'SERVICE' message.
Can anyone advise me.
Thanks,
Tim
I am planing on changing my fron brake discs and pads and need some advice on re-setting the service interval on the i drive.
I have seen varous threads on sticking the key in and pressing the odometer for 5-10 secs until SRVICE comes up the scrolling through.
I have tried this - and this is what i get.
1. Put key to position 2 (but do not press start button).
2. Press and hold odometer re-set button.
3. After approx 5 seconds a triangle (orange) appears, then disappears.
4. After approx 10 secs I get some info appear e.g 01.00 FGSTNR XP70449.
5. If I scroll through I get 8 messages from 01.00 - 01.08.
At no time do I get the 'SERVICE' message.
Can anyone advise me.
Thanks,
Tim
#2
Senior Members
Join Date: Jul 2008
Location: VA/DC Area
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by timo' post='997161' date='Sep 3 2009, 12:38 PM
Folks,
I am planing on changing my fron brake discs and pads and need some advice on re-setting the service interval on the i drive.
I have seen varous threads on sticking the key in and pressing the odometer for 5-10 secs until SRVICE comes up the scrolling through.
I have tried this - and this is what i get.
1. Put key to position 2 (but do not press start button).
2. Press and hold odometer re-set button.
3. After approx 5 seconds a triangle (orange) appears, then disappears.
4. After approx 10 secs I get some info appear e.g 01.00 FGSTNR XP70449.
5. If I scroll through I get 8 messages from 01.00 - 01.08.
At no time do I get the 'SERVICE' message.
Can anyone advise me.
Thanks,
Tim
I am planing on changing my fron brake discs and pads and need some advice on re-setting the service interval on the i drive.
I have seen varous threads on sticking the key in and pressing the odometer for 5-10 secs until SRVICE comes up the scrolling through.
I have tried this - and this is what i get.
1. Put key to position 2 (but do not press start button).
2. Press and hold odometer re-set button.
3. After approx 5 seconds a triangle (orange) appears, then disappears.
4. After approx 10 secs I get some info appear e.g 01.00 FGSTNR XP70449.
5. If I scroll through I get 8 messages from 01.00 - 01.08.
At no time do I get the 'SERVICE' message.
Can anyone advise me.
Thanks,
Tim
+1 , I just took my car to a shop to get my rear pads and rotors replaced...if they couldnt do it how should i? thanks
Thread
Thread Starter
Forum
Replies
Last Post
TexaZ3
Complete Car Sales
17
05-06-2015 09:54 AM