looking for remote Codder to unlock some goodies
#13
New Members
![Default](https://5series.net/forums/images/icons/icon1.gif)
I would see if you can do basic coding through NCS Expert:
- Open Coding Tool
- Open NCSExpert
- FileàLoad Profile – load Expertmodus (Offen) profile
- Click “OK”
- Click F1: “VIN/ZCS/FA”
- Click F3: “ZCS/FA | ECU”
- Select chassis (E60)
- Click “OK”
- Choose ECU – select “CAS”
- Click “OK”
- You should now have VIN and FA appearing. FA is VO code.
- Select F6 “BACK”
- Select F4 “Process ECU”
- Select module to process from the pop-up
- Click “OK”
- Select F4 “Read ECU”
- Window will pop up with .TRC file. Close it.
- Go back to coding tool and select “Load TRC-File”
- You should get a list of all settings available in the module.
- Use “search” button to find parameter. Click “Search next” until you find the parameter you are looking for.
- Select parameter value, for example “nicht_aktiv”
- Pop up box will appear to alter the value. There may be a tick box for a “quick change” from “nicht_aktiv” to “aktiv” for example. In some cases you may have to input the data, “wert_04” for example.
- Once value is changed, click “OK”
- Click “Save MAN-File”
- Click “YES” on pop-up
- Click “SAVE” on pop-up
- Click “YES” on pop-up: “Do you want to backup the MAN-File?”
- Click “SAVE” on popup.
- Go back to NCSExpert and click F2 “Change Job”
- Select “SG-Codieren”
- Click “OK”
- Click F3 “Execute job”
- Close coding tool
- Click “Yes” on popup: “Do you want to empty the MAN-File?”
- Done!
#15
New Members
Thread Starter
Join Date: Mar 2015
Location: Cape Cod Ma
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 09 535xi Touched by TURNER
Model Year: 2009
Engine: n54
![Default](https://5series.net/forums/images/icons/icon1.gif)
Cant wait to get my cable... Thanks for all the input PEEPS..
#16
New Members
Join Date: Jun 2014
Location: Boston
Posts: 517
Likes: 0
Received 6 Likes
on
6 Posts
My Ride: 2008 535xi
Model Year: 2008
Engine: n54
![Default](https://5series.net/forums/images/icons/icon1.gif)
Biz77 it worked like a charm.. I coded the turn off legal disclaimer and it disappeared.
Just to be sure, I coded the auto eject key when start button held down and it worked too!
But... I now don't know the source of my error with the TCU flash..
Just to be sure, I coded the auto eject key when start button held down and it worked too!
But... I now don't know the source of my error with the TCU flash..
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
#17
New Members
![Default](https://5series.net/forums/images/icons/icon1.gif)
And I'm afraid I can't be of much more help. I would wait for Ken to get back to you. My only suggestion would be to try updating all of your Daten files to the newest version.
#18
New Members
Join Date: Jun 2014
Location: Boston
Posts: 517
Likes: 0
Received 6 Likes
on
6 Posts
My Ride: 2008 535xi
Model Year: 2008
Engine: n54
![Default](https://5series.net/forums/images/icons/icon1.gif)
Okay just one question about updating the Daten files...
So the instructions I got were to open bmwcoding tools, then update the sp-daten, then update the winpfk. This takes a few minutes, even hangs for a few seconds, but resumes fine.
Do I have to do this every single time before I open the winpfk to try the flash? Although I am pretty sure I did this and still got the error.. it's worth trying it again.
I also tried looking up the error and got a few answers:
1) the voltage of my car battery has to be above 13V .. ie I need to hook it up to a charger. This seems odd since nobody mentions I have to.
2) I need to change the communication settings in winpfk .. which I tried to, no luck, different errors
3) my cable isn't set to latency 1 .. but I have verified this over and over it is still com1 latency 1 every single time I plug it into the same port.
So the instructions I got were to open bmwcoding tools, then update the sp-daten, then update the winpfk. This takes a few minutes, even hangs for a few seconds, but resumes fine.
Do I have to do this every single time before I open the winpfk to try the flash? Although I am pretty sure I did this and still got the error.. it's worth trying it again.
I also tried looking up the error and got a few answers:
1) the voltage of my car battery has to be above 13V .. ie I need to hook it up to a charger. This seems odd since nobody mentions I have to.
2) I need to change the communication settings in winpfk .. which I tried to, no luck, different errors
3) my cable isn't set to latency 1 .. but I have verified this over and over it is still com1 latency 1 every single time I plug it into the same port.
#19
New Members
![Default](https://5series.net/forums/images/icons/icon1.gif)
Okay just one question about updating the Daten files...
So the instructions I got were to open bmwcoding tools, then update the sp-daten, then update the winpfk. This takes a few minutes, even hangs for a few seconds, but resumes fine.
Do I have to do this every single time before I open the winpfk to try the flash? Although I am pretty sure I did this and still got the error.. it's worth trying it again.
I also tried looking up the error and got a few answers:
1) the voltage of my car battery has to be above 13V .. ie I need to hook it up to a charger. This seems odd since nobody mentions I have to.
2) I need to change the communication settings in winpfk .. which I tried to, no luck, different errors
3) my cable isn't set to latency 1 .. but I have verified this over and over it is still com1 latency 1 every single time I plug it into the same port.
So the instructions I got were to open bmwcoding tools, then update the sp-daten, then update the winpfk. This takes a few minutes, even hangs for a few seconds, but resumes fine.
Do I have to do this every single time before I open the winpfk to try the flash? Although I am pretty sure I did this and still got the error.. it's worth trying it again.
I also tried looking up the error and got a few answers:
1) the voltage of my car battery has to be above 13V .. ie I need to hook it up to a charger. This seems odd since nobody mentions I have to.
2) I need to change the communication settings in winpfk .. which I tried to, no luck, different errors
3) my cable isn't set to latency 1 .. but I have verified this over and over it is still com1 latency 1 every single time I plug it into the same port.
Once you update the daten files, they are updated. No need to do it every time.
I did not use a battery charger or any other type of power supply when I flashed mine.
Have you tried asking on bmwcoding.com?