PWM_AN_SL_V_AL_1_34
wert_01

There you go.

 

Mine has wert_01 and wert_04, it will not except wert_01 on its own.

 

Thanks guys.

Deffinatley got something a bit wrong, just drove home from the station with my lights on auto and I had full front lights on. It's not even dusk here yet

Either I've altered the sensitivity somewhere or I've programmed auto to mean full lights, will track it down and post my findings :-)

 

What time was it?, I came home at 6pm and my lights were on too, i kept shouting at the car to put them off

 

About 15min later than you, maybe I'm just looking for faults :-)

 

Mike, that's rather odd. I have coded this many times for many LCI cars and has always worked with wert_01 only.

 

Have you checked after you coded. There are many values that NCS adds on its own even if you didn't want it to. So you put wert_01 but NCS will force it to wert_01, wert_04. You only realise this after you read the ECU after you coded it and then compare it with what you coded.

 

I am pretty sure I have seen it as just wert_01, but I'll see if I remember to check next time. In any case though, I definitely never had the problem Mike described above where it would not accept just wert_01. It always worked for me.

 

Just looked on at the last file I programmed and I already have this so I assume I'm already running full voltage

PWM_AN_SL_V_AL_1_34
wert_01
wert_04

Also received these today :-)

 

Lucky sod