Hamann Splitter
09-30-2008, 05:33 PM
#1
Members
Thread Starter
Join Date: May 2006
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
I finally got my CF Hamann Splitter in and wanted to know what the best way is to attach it - specifically what kind of fasteners. I was thinking of using rubber washers so I don't torque down the bolt or steel washer directly onto the CF to avoid cracking it. Any input (and pics) would be greatly appreciated!
09-30-2008, 05:37 PM
#2
Contributors
Join Date: Sep 2007
Location: .
Posts: 8,199
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: .
Model Year: .
Originally Posted by acs5' post='682197' date='Sep 30 2008, 08:33 PM
I finally got my CF Hamann Splitter in and wanted to know what the best way is to attach it - specifically what kind of fasteners. I was thinking of using rubber washers so I don't torque down the bolt or steel washer directly onto the CF to avoid cracking it. Any input (and pics) would be greatly appreciated!
Here's what you can use:
- (10) 5/16 diameter bolts (1.25" length, 1.0" might also work)
- (20) 1/4 washers
- (10) 5/16 lock ring
- (10) 5/16 nuts
How about Gorilla Glue instead?
10-02-2008, 03:00 PM
#8
Members
Thread Starter
Join Date: May 2006
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
So, 107 views, 6 replies and only one of them were serious. Well thanks mrfva for the help and input, I really appreciate it. I really love this forum and the way everyone helps each other out, but some of you just have too much time on your hands.....
10-02-2008, 03:30 PM
#9
Contributors
Join Date: Sep 2007
Location: .
Posts: 8,199
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: .
Model Year: .
Originally Posted by acs5' post='683979' date='Oct 2 2008, 06:00 PM
So, 107 views, 6 replies and only one of them were serious. Well thanks mrfva for the help and input, I really appreciate it. I really love this forum and the way everyone helps each other out, but some of you just have too much time on your hands.....
In fact go with 1.25" bolts (1" might be too short). Post pics once you have it installed. We''d love to see pics 
Btw, you DON'T need glue. You'll just end up with a mess on your hands. If you want, you can also use double-sided tape as prep-work and alignment, prior to bolting it on.
10-02-2008, 03:42 PM
#10
Contributors
Join Date: Apr 2005
Location: MIAMI B*CH
Posts: 6,959
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: MY RIDE is DA real .-) HAMANN 5 aka BLACK MAMBA born on 16/06/2005/delivered on 05/08/2005 as following:
530dA (steptronic), Black II (JET), leather Dakota auburn black, mapple trim, head-up display, dynamic drive, active steering, adaptive xenon headlights (auto levelling) with headlight washers, alarm, comfort seats with massage function, advanced A/C, big compartment armrest, aux-in, MP3, Logic 7, Radio PRO, CD in-dash+cd changer, power rear sunshades, rear airbags, park distance control, auto dimming folding mirrors, smoking package, shiny shadow line (individual), fold down rear seats, ski bag, sport suspension, run flats on �116-style� rims (Good Year NCT5+), cup holders, debadged, fire extinguishers, additional permanent power outlet, BMW coat hanger, trunk release button (installed by Hobi), GPS tracking device and a big thx 2 Iceman.
Mods done:
� Authentic HAMANN FRONT APRON Including ellipsoid fog lights Item-No.: 10 060 110
� Authentic HAMANN REAR SPOILER Item-No.: 10 060 130,
� Authentic HAMANN HAMANN ALUMINIUM PEDALS For cars with manual gearbox Item-No.: 80 099 100 81,00 For cars with automatic transmission Item-No.: 80 099 120
� Authentic HAMANN FOOT REST In aluminium For left-hand drive vehicles Item No. : 80 099 122
� Authentic HAMANN HAND-BRAKE LEVER In aluminium For left- and right-hand drive cars Item No. : 80 099 216
� Authentic HAMANN Idrive of alu (sorry this is the only one in the World) but you can have it in carbon fiber ,
� Authentic HAMANN EXCLUSIVE FLOORMAT SET In black with HAMANN logo in silver For left-hand drive cars Item-No. : 80 060 120 For right-hand drive cars Item-No. : 80 060
� Authentic HAMANN COVER FOR OIL FILLER CAP In aluminium Item-No.: 80 099 117
� Authentic HAMANN SPORT REAR MUFFLER 4 TAILPIPES Sport rear muffler with four round stainless-steel tailpipes ( � 76mm ) Item-No.: 50 060 111
� Authentic HAMANN new add-on for M pack rear with diffusor for quad pipes -AVAILABLE NOW (http://forums.e60.net/index.php?act=ST&f=22&t=30630&st=0#entry332409)
� ///M steering wheel w Pegasus logo (this will be also changed to three spoke sports)
� ///M pack rear
� HAMANN ECU upgrade 265 HP 608 Nm.
most improtant:
�real and working like a charm forumsbuy real LED tails and PIAA 4700k fogs!!! for HAMANN full front apron you need H3
� CustomAngels, Angel Eyes Brighter than stocks 10X, WHITE & (REd for shows).
� Authentic HAMANN LIGHT-ALLOY WHEELS DESIGN EDITION RACE 20"
Ultra-light forged 3-pieced light-alloy wheel, Cross-spoke-design,Spider in black, titanium, screwing,polished flange
DIMENSIONS : 9.0 J x 20 FA Item No.: 91 207 315
10.5 J x 20 only RA Item No.: 91 207 625
Recommended 20" Complete Wheel Set DESIGN EDITION RACE I went with most aggressive Combination A.10 FA 9.0 J x 20 / RA 10.5 J x 20 with tires: FA 245/30 ZR 20 / RA 285/25 ZR 20
� Authentic HAMANN LOWERING KIT 4 progressive sport springs Lowering by approx. 40 mm FA, 20 mm RA Item-No.: 20 060 125
� Authentic HAMANN TIRE - PRESSURE CHECK SENSOR SYSTEM
� Authentic HAMANN SIDE SILLS Item-No.: 10 060 120
� Authentic HAMANN REAL CF ROOF SPOLIER Item-No.: 10 060 235
� Authentic HAMANN AIRBAG SPORT STEERING WHEEL 3-SPOKE Three-spoke design w their SMG paddles (For assembly O.E. airbag in exchange)
� Authentic HAMANN sports mirrors (all functions)
!!!!!!!!!!!!!!!!!!! and of course !!!!!!!!!!!!!!!!!
E60.net Clings
Still to do list;-):
� Our Hobi's camera system from : ww.switchchange.com).
� Individual leather interior (auburn+auburn alcantara)... and drive with sheer drivin' pleasure ... until 2009/2010 F10 comes or E60 possibly a 540d V8 diesel early in 2009 badly juiced!
Originally Posted by acs5' post='682197' date='Oct 1 2008, 03:33 AM
I finally got my CF Hamann Splitter in and wanted to know what the best way is to attach it - specifically what kind of fasteners. I was thinking of using rubber washers so I don't torque down the bolt or steel washer directly onto the CF to avoid cracking it. Any input (and pics) would be greatly appreciated!
otw you need screws and glue comes in with the package only for authentic products.