FTM "Tire pressure monitor" with new wheels
#11
![Default](https://5series.net/forums/images/icons/icon1.gif)
found this on another site.... gonna try this after i get off.
From the manual (2005 electronic version):
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is continued
automatically. When driving with snow
chains or with the compact wheel, do not initialize
the system.<
Control Center, for principle details, refer to
page 16.
1. Open the menu.
2. Select "Vehicle settings" and press the
controller.
3. Select "FTM" and press the controller.
4. Start engine, but do not start driving.
5. Select "Set tire pressure" and press the
controller.
6. Select "Yes" and press the controller.
7. Start to drive.
The message "Initializing" is displayed.
The initialization finishes during driving. Then
the message "Status: Active" appears on the
Control Display again.
From the manual (2005 electronic version):
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is continued
automatically. When driving with snow
chains or with the compact wheel, do not initialize
the system.<
Control Center, for principle details, refer to
page 16.
1. Open the menu.
2. Select "Vehicle settings" and press the
controller.
3. Select "FTM" and press the controller.
4. Start engine, but do not start driving.
5. Select "Set tire pressure" and press the
controller.
6. Select "Yes" and press the controller.
7. Start to drive.
The message "Initializing" is displayed.
The initialization finishes during driving. Then
the message "Status: Active" appears on the
Control Display again.
Originally Posted by hollywoodtrash' post='310409' date='Jul 13 2006, 02:46 PM
Yup, I have the same exact problem.
#12
Members
Join Date: Jan 2005
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 BMW 645 black sapphire metallic, 19" Style 166 (245/40 & 285/35 w 15mm spacers)
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by dc1' post='310415' date='Jul 14 2006, 12:56 AM
found this on another site.... gonna try this after i get off.
From the manual (2005 electronic version):
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is continued
automatically. When driving with snow
chains or with the compact wheel, do not initialize
the system.<
Control Center, for principle details, refer to
page 16.
1. Open the menu.
2. Select "Vehicle settings" and press the
controller.
3. Select "FTM" and press the controller.
4. Start engine, but do not start driving.
5. Select "Set tire pressure" and press the
controller.
6. Select "Yes" and press the controller.
7. Start to drive.
The message "Initializing" is displayed.
The initialization finishes during driving. Then
the message "Status: Active" appears on the
Control Display again.
From the manual (2005 electronic version):
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is continued
automatically. When driving with snow
chains or with the compact wheel, do not initialize
the system.<
Control Center, for principle details, refer to
page 16.
1. Open the menu.
2. Select "Vehicle settings" and press the
controller.
3. Select "FTM" and press the controller.
4. Start engine, but do not start driving.
5. Select "Set tire pressure" and press the
controller.
6. Select "Yes" and press the controller.
7. Start to drive.
The message "Initializing" is displayed.
The initialization finishes during driving. Then
the message "Status: Active" appears on the
Control Display again.
Regards,
Allar
Thread
Thread Starter
Forum
Replies
Last Post