e46 wheels on my e60
Thread Starter
Members
Joined: Sep 2009
Posts: 31
Likes: 0
From: Northern Ireland
My Ride: 2004 530d
got a chance here to get a set of 19 inch wheels for my e60 , they have came of an e46 . Will they fit or do i need to scrap the idea altogether ;(
tia lads
wanting to know as i am about to leave and buy them if they will fit
tia lads
wanting to know as i am about to leave and buy them if they will fit
Thread Starter
Members
Joined: Sep 2009
Posts: 31
Likes: 0
From: Northern Ireland
My Ride: 2004 530d
Been looking around and people saying i will need 20 mm spacers at least . I am guessing this will make the ride poor . I think i will just phone the guy and apologise for wasting his time as i aint looking good .
Sorry for a wasted post lads , thought i would have been answered right away
but the people who know must be still in bed lol
Thread Starter
Members
Joined: Sep 2009
Posts: 31
Likes: 0
From: Northern Ireland
My Ride: 2004 530d
Originally Posted by 525iEnjoy' post='1020934' date='Sep 30 2009, 03:13 PM
you'll need 10-15mm hub centric spacer at the min for the fronts uh rears you can...Are these M3 19's or non M3 19's
it is non m3 , they have came of an e46 coupe not sure on the model though .
Cheers
Hmm if the Offsets on the rims are in the 40's you'll need long bolts and 20mm spacers at that point you'll be putting unwanted stress on your hub and bearings. What wheels are you looking at post em up
Thread Starter
Members
Joined: Sep 2009
Posts: 31
Likes: 0
From: Northern Ireland
My Ride: 2004 530d
this is the only pic i have , i was wanting to get a proper look at them today . Unfortunately i have began to doubt i will be having any luck with them
Hopefully you can guess the rims lol
but no harm done , think i will just stick to what i have
The rims were advertised @ 350 apparently like new with good tyre and tread , not sure manufacturer though .
Hopefully you can guess the rims lol
but no harm done , think i will just stick to what i have
The rims were advertised @ 350 apparently like new with good tyre and tread , not sure manufacturer though .
Thread Starter
Members
Joined: Sep 2009
Posts: 31
Likes: 0
From: Northern Ireland
My Ride: 2004 530d
Thanks 525i
, they do look very much like it , but all this spacer stuff is putting me of . I have the 5 series MV11's on my e60 at the minute , but the cost of runflats has made me look towards different wheels altogether for the car but i suppose i am better with the original bmw rims rather than changing to some heavy spacer requiring cheap make .
cheers for the help all the same .
, they do look very much like it , but all this spacer stuff is putting me of . I have the 5 series MV11's on my e60 at the minute , but the cost of runflats has made me look towards different wheels altogether for the car but i suppose i am better with the original bmw rims rather than changing to some heavy spacer requiring cheap make . cheers for the help all the same .
Members
Joined: Apr 2008
Posts: 27
Likes: 0
From: MALLORCA, SPAIN
My Ride: 2007 525I CARBON BLACK WITH CREAM LEATHER AND SILVER INSERTS,
FULL CUSTOM KEVLAR AND CARBON KIT, BUMPERS SKIRTS SPOILERS, CARBON VENTED BONET, CARBON MIRRORS, M5 WINGS, PURE HID FOGS, PURE WHITE EYES, XENON ADAPTIVES, CUSTOM GRILLS, 19" ONE OFF RIMS, APEXI SPRINGS -30MM, GROOVED DISKS AND EBC PADS, 40MM SPACERS ALL ROUND, CARBON DYNAMICS AIR INDUCTION KIT, CUSTOM MADE 80MM EXHAUST SYSTEM FROM CAT BACK WITH TWIN SQUARE EXITS, RDS CHIP TUNING, LIGHTENED FLYWHEEL, IPOD INTERFACE, AUX IN, MEDIA CENTER PC WITH ACTIVE INTERNET THROUGH 3G, MUTLIMEDIA INTERFACE, 2 ALPINE 7"TVS IN HEADRESTS, 2 1000WRMS ROCKFORD AMPS, 2 ALPINE XSERIES 12" SUBS SEALED ENCLOSURE, 2 JBL GT 12" SUBS PORTED ENCLOSURE, 2 FARAD CAPACITOR, KEF MIDS 8 AND 4S,
COMING SOON PROFESIONAL NAVI.
i've been running 40mm (i like the wheel to look really pushed out to the arches look) spacers for over 2 years now with no problems at all
Thread
Thread Starter
Forum
Replies
Last Post
chadillac2000
E60, E61 Parts, Accessories and Mods
42
Sep 13, 2017 11:15 AM



