Debadged the trunk today
#1
New Members
Thread Starter
Join Date: Aug 2014
Location: Cupertino CA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Au
![Default](https://5series.net/forums/images/icons/icon1.gif)
Debadged the trunk today, much cleaner look in my opinion!
I used the Griots Garage Adhesive Remover, a Heat Gun, and Medium Autoscrub pad on a Flex DA. I found that a lot of heat really helped get everything off without marring the paint, ~90C paint temperature did the trick (as confirmed with the IR thermometer). There is still a slight shadow of the letter, but that should come off when the car is polished.
I used the Griots Garage Adhesive Remover, a Heat Gun, and Medium Autoscrub pad on a Flex DA. I found that a lot of heat really helped get everything off without marring the paint, ~90C paint temperature did the trick (as confirmed with the IR thermometer). There is still a slight shadow of the letter, but that should come off when the car is polished.
![](https://farm9.staticflickr.com/8566/16124071415_0cb2e1bbe9_o.jpg)
#4
New Members
Thread Starter
Join Date: Aug 2014
Location: Cupertino CA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Au
![Default](https://5series.net/forums/images/icons/icon1.gif)
I heated the area to ~90C using the heat gun with the letters attached. This made them very soft, then I used a length of 28 gauge PTFE wire to pull them off in one piece, they came right off with very little force.
On the adhesive, I opened the trunk and allowed it to soak with a microfiber saturated in the adhesive remover for ~10 minutes. I then heated the area to 90C again and lightly rubbed the adhesive off with the microfiber.
FWIW, BMW OEM labels use 3M 5605 foam tape, or equivalent. This tape softens significantly above 70C.
On the adhesive, I opened the trunk and allowed it to soak with a microfiber saturated in the adhesive remover for ~10 minutes. I then heated the area to 90C again and lightly rubbed the adhesive off with the microfiber.
FWIW, BMW OEM labels use 3M 5605 foam tape, or equivalent. This tape softens significantly above 70C.
#6
Members
Senior Members
Join Date: Apr 2012
Location: Concord, CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Alpine E60, '09 535i-Premium, Sport and Comfort Access PackageMods: Lux H8 V3 Angel Eyes, Weisslicht LED license plate lights, Interior LED lights, RPI Scoop, Matte Black Grills, Smoked LED side markers & side reflectors, 35% tint all around, and a 3
#7
Members
Senior Members
Join Date: Apr 2012
Location: MA/CT
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 525i 6MT
![Default](https://5series.net/forums/images/icons/icon1.gif)
There's a tool to take these off.. Literally takes 10 minutes start to finish. Big spatula looking thing that cuts through the glue. Then an eraser wheel on a rotary tool for the remaining glue. I've been contemplating doing this as well...
#8
New Members
Join Date: Jan 2015
Location: Cheshire
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 520D msport
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi guys, first post ![Smile](https://5series.net/forums/images/smilies/imported/smile.gif)
Very simple, Really hot water (not boiling) poor plenty of really hot water on the badges, then simply twist them off. Takes about a minute.
Continue with a little more hot water after the badge has been removed to get any remaining glue off.
No chemical, not cutters, no abrasives.
![Smile](https://5series.net/forums/images/smilies/imported/smile.gif)
Very simple, Really hot water (not boiling) poor plenty of really hot water on the badges, then simply twist them off. Takes about a minute.
Continue with a little more hot water after the badge has been removed to get any remaining glue off.
No chemical, not cutters, no abrasives.
![Smile](https://5series.net/forums/images/smilies/imported/smile.gif)
#9
New Members
Join Date: Jan 2014
Location: Orange County
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 BMW 550i Sport Deep Sea Blue