Comfort seats retrofit possible?
New Members
Joined: Jan 2016
Posts: 221
Likes: 0
From: Vietnam
My Ride: 2006 525i
Model Year: 206
Comfort seat
I did mine. Its not just simple plug and play.
Yoy have to add Lin bus wire from the seat module to the center console. Also the wiring for B pillar airbag sensor must be changed otherwise it will throw code on airbags and seat occupancy sensor.
Finish it up but adding the VO for comfort seat and voila.
New Members
Joined: Jun 2013
Posts: 21
Likes: 0
From: vancouver, BC
My Ride: 2011 335i M Sport
Model Year: 2011
Engine: N55B30
I did mine. Its not just simple plug and play.
Yoy have to add Lin bus wire from the seat module to the center console. Also the wiring for B pillar airbag sensor must be changed otherwise it will throw code on airbags and seat occupancy sensor.
Finish it up but adding the VO for comfort seat and voila.
Yoy have to add Lin bus wire from the seat module to the center console. Also the wiring for B pillar airbag sensor must be changed otherwise it will throw code on airbags and seat occupancy sensor.
Finish it up but adding the VO for comfort seat and voila.
New Members
Joined: May 2020
Posts: 56
Likes: 5
From: Portland, Maine
My Ride: 2008 BMW 528i
Model Year: 2008
Engine: N52K
Sorry to revive this thread. I just bought a set of comfort seats from a junk yard. donor car is 2008 528i LCI. Mine is the same. I only have electric seats with memory and no heat. How hard is it to retrofit the comfort seats with heat? I have the dash switch for the heat. I understand I need to prepare the wiring for the heat. I am just not sure about the rest. Please help.
FYI, I have the module that was in the donor seats. I have the entire seat with some partial wiring that goes under the carpet.
TIA
FYI, I have the module that was in the donor seats. I have the entire seat with some partial wiring that goes under the carpet.
TIA
Probation Members
Joined: Jan 2022
Posts: 1
Likes: 0
From: london
My Ride: bmw e60 530xd
E60 seats retrofit
I did mine. Its not just simple plug and play.
Yoy have to add Lin bus wire from the seat module to the center console. Also the wiring for B pillar airbag sensor must be changed otherwise it will throw code on airbags and seat occupancy sensor.
Finish it up but adding the VO for comfort seat and voila.
Yoy have to add Lin bus wire from the seat module to the center console. Also the wiring for B pillar airbag sensor must be changed otherwise it will throw code on airbags and seat occupancy sensor.
Finish it up but adding the VO for comfort seat and voila.
i have an error on seat occupancy sensor because of B pillar airbag sensor.
can you give me a wire diagram?
thank you!
Thread
Thread Starter
Forum
Replies
Last Post
Bill109
Private Member Classifieds
4
Feb 12, 2016 04:37 PM