E60, E61 Parts, Accessories and Mods Discussion about both stock and aftermarket parts for the E60. Accessories and modifications too!

Car Is Shaking!!!!

Thread Tools
 
Search this Thread
 
Old 04-22-2008 | 10:11 PM
  #1  
///M Lifestyle's Avatar
Thread Starter
Senior Members
 
Joined: Aug 2006
Posts: 1,057
Likes: 0
From: SoCal
Default

Ive been having this problem with my 20s off and on, was not like this before but everytime I hit 40 mph or more car starts to woble and I can feel it mainly in the front, what can the problem be from, should I take to dealer and have them fix it?
Old 04-22-2008 | 10:14 PM
  #2  
westcoast550's Avatar
Contributors
 
Joined: Apr 2007
Posts: 4,459
Likes: 0
From: Vancouver, BC , Canada
My Ride: 2011, X6 Hybrid . Alpine White , every option. 20" Conti' NON runflats,OEM trunk spoiler , LUX V3 AE's , HP Thunder Fogs , custom front bumper reflector delete........
Default

lot's of potential possibilities , but do you have spacers ??
Old 04-22-2008 | 10:21 PM
  #3  
///M Lifestyle's Avatar
Thread Starter
Senior Members
 
Joined: Aug 2006
Posts: 1,057
Likes: 0
From: SoCal
Default

no spacers no nothing
Old 04-22-2008 | 11:15 PM
  #4  
monsterj34's Avatar
Senior Members
 
Joined: Nov 2007
Posts: 2,328
Likes: 0
From: VA
Default

do you have hubcentric rings?

if you dont or had it maybe you need to replace them....

it will help to reduce vibration on aftermarket rims.
Old 04-23-2008 | 07:10 AM
  #5  
///M Lifestyle's Avatar
Thread Starter
Senior Members
 
Joined: Aug 2006
Posts: 1,057
Likes: 0
From: SoCal
Default

so hubcentric rings on the front and back would stop the vibrations?
Old 04-23-2008 | 07:14 AM
  #6  
C's Bimmer's Avatar
Contributors
 
Joined: Feb 2006
Posts: 14,646
Likes: 0
From: NY
My Ride: 2008 Silverstone II E60 M5 2012 E70 AW X5 50i Sport w/ LCI Aero Kit and Rocker Panels
Default

Member poleposition had something similar happen on his old 530. When he took of his old, rear spacers and put his stock wheels back on, the rear wheels could literally be shaken back and forth, with the lug nuts tight and snug. It was the most bizarre thing. Did you have spacers on before you parted out your car?
Old 04-23-2008 | 07:55 AM
  #7  
525iEnjoy's Avatar
Senior Members
 
Joined: Feb 2007
Posts: 1,626
Likes: 0
From: Socal-90601
Default

A lot of aftermarket wheel places make the bore of a rim 74.1 when our cars are 72.6 the rims should have come with hub rings to fill that gap. Dont rule out a bent rim or a unbalanced tire/rim check for these also !
Old 04-23-2008 | 08:00 AM
  #8  
monacobmw's Avatar
Contributors
 
Joined: May 2006
Posts: 719
Likes: 0
From: Miami, Florida
Default

You clearly have a hubcentric problem (in my opinion) unless you have a bad wheel problem (defective).

Your wheels are probably larger than your hub bar (as stated immediately above), and something may have happened with the rings that fill the gaps. Maybe one got lost or you never had them.

In addition, many recommend that you rotate the wheel as you tighten the lugs. Otherwise, if the rings are off just a little, gravity may cause an imperfect fit.

The rings only center the wheel, and you technically do not need rings if you could center the wheel yourself before tightening the bolts. Gravity does not let this happen.
Old 04-23-2008 | 10:29 AM
  #9  
///M Lifestyle's Avatar
Thread Starter
Senior Members
 
Joined: Aug 2006
Posts: 1,057
Likes: 0
From: SoCal
Default

are all hubcrntric rings same size for bmw?
Old 04-23-2008 | 10:38 AM
  #10  
525iEnjoy's Avatar
Senior Members
 
Joined: Feb 2007
Posts: 1,626
Likes: 0
From: Socal-90601
Default

you're in socal go to Discount Tire they should have some rings.

Help us out by listing the specs of your rims ,model, whos the maker, etc..



All times are GMT -8. The time now is 09:46 AM.