Accident damage to front end :(, But finally excuse to mod :)
#1
Contributors
Thread Starter
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 525
Model Year: 2004
I had an accident yesterday, my fault and I'm kicking my self for being such an idiot. Hit the brakes but hit an ice patch and still slid into the car in front of me. Not much damage to their car (scuffs on the bumper), but the front end of my '04 525 looks bad. The nose of my car tilted downward under the other car, so there was no lower bumper impact or airbags, however the bumper cover, lights, grills, hood are all toast along with all the plastic bracing and likely my radiator (top part looks pushed in), very minor damage to front fenders that I'm hoping won't need replacing. I'm thankful that the car is engineered to be so safe, but with all the broken plastic pieces I see behind my grill, safety does not mean less damage. I'm guessing that this is going to be a 5-7k bill as nothing on an E60 is cheap. The car was conservatively worth about $18k if I had sold before the accident (was perfect, but an '04 Base with 68K doesn't demand any big $$), so I'm thinking it's definitely worth the repair as even a $7k write off is better than an $18k writeoff (less part out which I don't want to deal with). The hit did not feel hard at all, but the impact was above the bumper, and those pieces are more plastic.
The good news is no one was hurt, the other drive was a super nice guy, and I've quite kicking myself for this happening.
I'm trying to find silver lining and I'm thinking that since I'm going to have to pay for my messed up parts (a whole other story w/insurance , there may be some better options that going with the stock pieces.
I'm good with aftermarket or previously owned pieces pieces (guess I'll be checking the classifieds section next), but could use some direction on some cost effective replacement options and where to purchase on-line,
Big ticket items would be:
1) Bumper Cover (either used stock or other after market options)
2) Front lights (left and right) - mine were the base Halogen lights, not sure if there is an easy change or if I just look for replacements
3) Hood - probably just go with a replacement as the only option I could think of would be fiber and I don't need that kind of premium on a 525base.
4) Radiator - recomendations on good aftermarket? or should I go with a standard stock.
The good news is no one was hurt, the other drive was a super nice guy, and I've quite kicking myself for this happening.
I'm trying to find silver lining and I'm thinking that since I'm going to have to pay for my messed up parts (a whole other story w/insurance , there may be some better options that going with the stock pieces.
I'm good with aftermarket or previously owned pieces pieces (guess I'll be checking the classifieds section next), but could use some direction on some cost effective replacement options and where to purchase on-line,
Big ticket items would be:
1) Bumper Cover (either used stock or other after market options)
2) Front lights (left and right) - mine were the base Halogen lights, not sure if there is an easy change or if I just look for replacements
3) Hood - probably just go with a replacement as the only option I could think of would be fiber and I don't need that kind of premium on a 525base.
4) Radiator - recomendations on good aftermarket? or should I go with a standard stock.
#2
Contributors
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ceenit' post='1087235' date='Jan 9 2010, 01:11 PM
I had an accident yesterday, my fault and I'm kicking my self for being such an idiot. Hit the brakes but hit an ice patch and still slid into the car in front of me. Not much damage to their car (scuffs on the bumper), but the front end of my '04 525 looks bad. The nose of my car tilted downward under the other car, so there was no lower bumper impact or airbags, however the bumper cover, lights, grills, hood are all toast along with all the plastic bracing and likely my radiator (top part looks pushed in), very minor damage to front fenders that I'm hoping won't need replacing. I'm thankful that the car is engineered to be so safe, but with all the broken plastic pieces I see behind my grill, safety does not mean less damage. I'm guessing that this is going to be a 5-7k bill as nothing on an E60 is cheap. The car was conservatively worth about $18k if I had sold before the accident (was perfect, but an '04 Base with 68K doesn't demand any big $$), so I'm thinking it's definitely worth the repair as even a $7k write off is better than an $18k writeoff (less part out which I don't want to deal with). The hit did not feel hard at all, but the impact was above the bumper, and those pieces are more plastic.
The good news is no one was hurt, the other drive was a super nice guy, and I've quite kicking myself for this happening.
I'm trying to find silver lining and I'm thinking that since I'm going to have to pay for my messed up parts (a whole other story w/insurance , there may be some better options that going with the stock pieces.
I'm good with aftermarket or previously owned pieces pieces (guess I'll be checking the classifieds section next), but could use some direction on some cost effective replacement options and where to purchase on-line,
Big ticket items would be:
1) Bumper Cover (either used stock or other after market options)
2) Front lights (left and right) - mine were the base Halogen lights, not sure if there is an easy change or if I just look for replacements
3) Hood - probably just go with a replacement as the only option I could think of would be fiber and I don't need that kind of premium on a 525base.
4) Radiator - recomendations on good aftermarket? or should I go with a standard stock.
The good news is no one was hurt, the other drive was a super nice guy, and I've quite kicking myself for this happening.
I'm trying to find silver lining and I'm thinking that since I'm going to have to pay for my messed up parts (a whole other story w/insurance , there may be some better options that going with the stock pieces.
I'm good with aftermarket or previously owned pieces pieces (guess I'll be checking the classifieds section next), but could use some direction on some cost effective replacement options and where to purchase on-line,
Big ticket items would be:
1) Bumper Cover (either used stock or other after market options)
2) Front lights (left and right) - mine were the base Halogen lights, not sure if there is an easy change or if I just look for replacements
3) Hood - probably just go with a replacement as the only option I could think of would be fiber and I don't need that kind of premium on a 525base.
4) Radiator - recomendations on good aftermarket? or should I go with a standard stock.
As for the mods, I would just stay with the OEM parts for the hood and radiator, but definitely get the M-Tech bumper and HID fog-lights. You can get HID fogs afterward too...
#4
Contributors
Join Date: Mar 2009
Location: New York, New York
Posts: 10,301
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: See my signature
Originally Posted by Krozi' post='1087357' date='Jan 9 2010, 06:03 PM
Glad to hear no one got hurt
As for the mods, I would just stay with the OEM parts for the hood and radiator, but definitely get the M-Tech bumper and HID fog-lights. You can get HID fogs afterward too...
As for the mods, I would just stay with the OEM parts for the hood and radiator, but definitely get the M-Tech bumper and HID fog-lights. You can get HID fogs afterward too...
#5
Contributors
Thread Starter
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 525
Model Year: 2004
Thanks for the responses. I'll have a better feel after tommorow morning when I meet with the body shop manager.
Thus far I'm leaning towards the MTech replica bumper cover but still need to figure out cost differentials. Still thinking through some of the other options on lighting.
I haven't found any sites that sell the entire fixtures. The prices from the dealership are incredibly high. I may have to call a few salvage yards.
My rental car is a VW Passat. While it's German, it's clearly not the ride of the BMW.
Thanks again.
Thus far I'm leaning towards the MTech replica bumper cover but still need to figure out cost differentials. Still thinking through some of the other options on lighting.
I haven't found any sites that sell the entire fixtures. The prices from the dealership are incredibly high. I may have to call a few salvage yards.
My rental car is a VW Passat. While it's German, it's clearly not the ride of the BMW.
Thanks again.
#6
Contributors
Join Date: Jul 2008
Location: Chicago
Posts: 4,410
Likes: 0
Received 0 Likes
on
0 Posts
The worst part about a front end collision on an E60 is that if you bent the frame at all it is VERY expensive and in some cases the insurance company will total your car. The frame is all aluminum in one piece. The car is build like a damn airplane with rivets and glue.
#7
Senior Members
Join Date: Oct 2006
Location: Milwaukee, WI
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 Mercedes CLS63 AMG
Designo Graphite with white leather interior
Keyless Go, Heated/Ventilated seats, Parktronic
For lighting check out John, aka Brabusw209amg, who is more than qualified to hook you up with all of the lights you need
#8
Contributors
Join Date: Jun 2008
Location: Tacoma, WA
Posts: 5,501
Likes: 0
Received 0 Likes
on
0 Posts
honestly you are overestimating the value of the repairs by a bit
your insurance company already has enormous connections for lowest bidder contracts and until you take it to a shop that isnt paid by being "prefered" by your insurance you really wont know what the price will be
your insurance company already has enormous connections for lowest bidder contracts and until you take it to a shop that isnt paid by being "prefered" by your insurance you really wont know what the price will be
#9
Contributors
Join Date: Sep 2008
Location: Los Angeles
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 530i
87 325is
85 VW GTI
Change or to projector angel eye headlights. There is a company called eagle i believe who makes them for $800 which is the price of one new oem light. The savings should pay for any price difference for your carbon fiber hood and umnitza front bumper.
#10
Contributors
Thread Starter
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 525
Model Year: 2004
Originally Posted by einstein57' post='1088299' date='Jan 11 2010, 03:23 PM
Change or to projector angel eye headlights. There is a company called eagle i believe who makes them for $800 which is the price of one new oem light. The savings should pay for any price difference for your carbon fiber hood and umnitza front bumper.
I could not find this company when I did a search. If you happen to know the web site, please post it.
Thanks for all the feedback.