Would this fit in rear?
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 5
From: Kajaani, Finland
My Ride: Bmw 530d 2004
Ok I'm little impatient and putting this question here too. I asked this on the mods section, but didn't get any answers, so... 
There are these wheels I like. Sizes are:
Front: 8,5x19 ET14 --> Should fit without problems
Rear: 10x19 ET16 --> What about this? 10 inch isn't much, but the offset number is quite minimal.
Maybe no one can tell this directly, but I've seen some people here having very wide wheels in rear. For example those lovely Radenergies
...
So if you could tell about your wide rear sets and I could do some comparisons.
There are these wheels I like. Sizes are:
Front: 8,5x19 ET14 --> Should fit without problems
Rear: 10x19 ET16 --> What about this? 10 inch isn't much, but the offset number is quite minimal.
Maybe no one can tell this directly, but I've seen some people here having very wide wheels in rear. For example those lovely Radenergies
... So if you could tell about your wide rear sets and I could do some comparisons.
Members
Joined: Oct 2007
Posts: 82
Likes: 0
From: Oxfordshire, UK
My Ride: 535d Sport Saloon / Carbon Black / E-maps re-map / 20" Vortex R alloys - carbon black / Pro-Nav / Vis pack / heated leather / enough for now /
Sorry - can't directly answer that. I'd suspect the offset is too low.
I'm currently running 10J x 20" rears with ET20, and no rubbing issues at all.
I'm currently running 10J x 20" rears with ET20, and no rubbing issues at all.
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 5
From: Kajaani, Finland
My Ride: Bmw 530d 2004
Originally Posted by jonno_' post='613628' date='Jul 1 2008, 06:44 PM
Sorry - can't directly answer that. I'd suspect the offset is too low.
I'm currently running 10J x 20" rears with ET20, and no rubbing issues at all.
I'm currently running 10J x 20" rears with ET20, and no rubbing issues at all.
But I really would like to hear some opinions.
Anyone else?
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 5
From: Kajaani, Finland
My Ride: Bmw 530d 2004
Ok 
?
I make this easier for you. I calculated 10" x 19" ET16 rim would stick 0,29" (0,735cm) more out than 166M wheel 9,5" x 19" ET17.
So you guys with 166M's with this offset in rear (M6 offset?), how would it be? Is there room enough for this kind of rim?
?I make this easier for you. I calculated 10" x 19" ET16 rim would stick 0,29" (0,735cm) more out than 166M wheel 9,5" x 19" ET17.
So you guys with 166M's with this offset in rear (M6 offset?), how would it be? Is there room enough for this kind of rim?
Members
Joined: May 2008
Posts: 86
Likes: 0
From: Jakarta, Indonesia
i am not sure about the offset, but 10" wide, 19" diameter shouldn't be a problem as long as it has the right offset. lotsa people i know use 20x10..
i'm running 20x11 on my rear ... but they rub .. !!!
i'm running 20x11 on my rear ... but they rub .. !!!
Thread
Thread Starter
Forum
Replies
Last Post
asinner
Private Member Classifieds
2
May 6, 2015 06:03 PM
turbogate
Private Member Classifieds
6
Apr 11, 2015 05:02 PM
