Originally Posted by Cockers (Post 1504218)

Part 2..

Then I simply inserted the 2 pins I made up into 7&9 (I will attach part numbers at the end, all parts from Maplins in the UK).

Attachment 141124

Then put the housing back on, plug the White box back in and put it back where it belongs, I then run the other end of the cables up to the left and out by the passenger air Bag (you need to remove the length of trim that runs across the front of the dash, instruction in one of the attached videos earlier, its easy, just need to jimmy it a bit).

Attachment 141125
Attachment 141126

Then I run the cable across the car and through the centre console unit, again instructions to remove this are in the previous videos, its only a couple of screws. I then worked the cable to where the steering when adjuster is and left plenty of cable as I'm not sure where I am going to place the push switch yet.

Attachment 141127
Attachment 141128

As I said in my previous post, I may purchase a switch with an LED, or even the original parts for the gear shifter, but for now it works perfectly just no 'sport' light on the dash.

I will post pictures of the parts I used in the next post, they are all available from Maplins cheap enough (less than £5 for the lot).

Get out there and do the mod, you wont regret it.....

Originally Posted by balbs (Post 1504344)

Cocker's car is LCI. The YouTube clip is for pre-LCI.

Originally Posted by dbond (Post 1504394)

to LCI guys missing some love (and the 'SPORT' indicator ;) ) check your dashboard coding for

1. FDC_VERBAUT (address 00300005) - DYNAMIC DRIVING CONTROL (FDC) INSTALLED
2. FDC_ID_MONITOR (address 00300405) - IDENTIFICATION TIMEOUT FOR DYNAMIC DRIVING CONTROL (FDC)

Originally Posted by stel_i79 (Post 1503999)

i know..
can u please say yes:))
i will send u the conector..and make a cable for me as yours..so all ii will have to do is connect it to the sport button and to dtc in the mid dash
please..pretty please :))

i will "donate" some $
please give me your adress :)