![]() |
How to access A169 box in lci cars? Yes, its behind glove box but any instructions would be appreciated! No lci diy pics sent yet.
|
I too am an LCI owner and would love the sport function without having to spend hundreds on the SAT setup. I really just want the throttle and steering improvements. After reading end to end in this thread I haven't seen a single LCI success story. Did I miss something?
|
It's on the diagram in post #1 pic 4 and also post #17 ... only 3 wires out of the 4 pins are in use ...
Originally Posted by stel_i79
(Post 1497980)
ha
u will see how the connector have 4 wires :)) that"s why i stop right there..because i have no ideea wich of this 4 wires goes to connectors #8,#9 and #10 on the center dash!!:)) |
It's already in the diagram by the OP ... and even in some earlier posts.
Here's in case it's confusing for some ... pin # on the FDC switch on the left side & pin # on the dash switch block on the right side: #1 - #9 (LED) #2 - #10 (Ground) #3 - #8 (signal) #4 - N/A
Originally Posted by balbs
(Post 1497985)
I'll use a multimeter to see which one temporarily shorts for 8 and 10 pin and which one for the LED.
|
Originally Posted by BlaSTiWi
(Post 1500218)
It's already in the diagram by the OP ... and even in some earlier posts.
Here's in case it's confusing for some ... pin # on the FDC switch on the left side & pin # on the dash switch block on the right side: #1 - #9 (LED) #2 - #10 (Ground) #3 - #8 (signal) #4 - N/A :twoup: :twoup: |
I am still trying to figure out the difference between this and DS, anyone care to comment on that?
|
Originally Posted by Samu23el
(Post 1500433)
Give me video proof instead of photo shopped pictures.http://mbm999.info/17.jpghttp://mbm999.info/18.jpghttp://mbm999.info/19.jpghttp://mbm999.info/20.jpg
|
Originally Posted by dakest
(Post 1500366)
I am still trying to figure out the difference between this and DS, anyone care to comment on that?
-steering requires more input force for same amount of turning -auto shifting points=DS |
what are the parts required, for this project?
|
Originally Posted by roskinc
(Post 1500440)
i posted a video, look a page or two behind.
|
| All times are GMT -8. The time now is 05:06 AM. |
© 2026 MH Sub I, LLC dba Internet Brands