Water got into Micro Power Module
#41
New Members
Join Date: Jun 2011
Location: scotland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 E60 530d SE
A bottle of water I left in my boot (trunk) leaked and burnt out my
MPM. After I cleaned all the connections and replaced it
all my systems powered up ok. I did not need to have the car reprogrammed.
I also moved the MPM and PDC modules from the spare tire well to the side of the trunk.
Not one of BMW best ideas were they put them.
Thanks to this forum for all the advise.
MPM. After I cleaned all the connections and replaced it
all my systems powered up ok. I did not need to have the car reprogrammed.
I also moved the MPM and PDC modules from the spare tire well to the side of the trunk.
Not one of BMW best ideas were they put them.
Thanks to this forum for all the advise.
#43
New Members
Join Date: Oct 2020
Location: Morganton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 530i 2005 bmw
Whee can I find. Wiring diagram for 05 530i, mpm...radio works intermittent and the wire 7 on this picture is not hot when running, trying to find what would feed that circuit
thanks for any insight
thanks for any insight
#44
New Members
Join Date: Oct 2020
Location: Morganton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 530i 2005 bmw
So I go out this am radio cold, and it works fir short while, and there’s power at number 7 , so I’m thinking r
the ccc is overheating... and it sends the power to the mpm, but not sure
thoughts anyone?
the ccc is overheating... and it sends the power to the mpm, but not sure
thoughts anyone?
Thread
Thread Starter
Forum
Replies
Last Post