Service Messages (Error?) after CIC retrofit
Thread Starter
Contributors
Joined: Mar 2010
Posts: 3,099
Likes: 5
From: Los Angeles, CA
My Ride: BMW
Model Year: 2006
So I got these service messages when the car starts up. It wasn't there before I did the CIC retrofit.

Also, I see these in the vehicle status...It doesn't say anything for what kind of Service it wants...Can anybody shed some light on this?

Although my car has 64000 miles. I already cleared the 60K mile service along time ago.
Also, while I was checking out the service resets, I ran into this with no number value underneath. What is this for?

Thanks for the help guys!

Also, I see these in the vehicle status...It doesn't say anything for what kind of Service it wants...Can anybody shed some light on this?

Although my car has 64000 miles. I already cleared the 60K mile service along time ago.
Also, while I was checking out the service resets, I ran into this with no number value underneath. What is this for?

Thanks for the help guys!
Thread Starter
Contributors
Joined: Mar 2010
Posts: 3,099
Likes: 5
From: Los Angeles, CA
My Ride: BMW
Model Year: 2006
Okay, I guess the bottom pic is concerning the microfilter. However, I changed that out already and remember resetting it.??? I don't know why it doesn't show a value.
it is indeed for microfilter. Sometimes it is normal to get errors unless you let the car sit for a while. Did you do this with NCS? You did a complete encoding and then let the car sit for a while. Sometimes It takes up to 24 hours for coding to stick or for things to reset. I don't think it's necessarily 24 hours but I just usually do this stuff in the evening, go to sleep and when i wakeup it has fixed itself. Like the stupid time/date issue!!!!!!!!!!!!!
Thread Starter
Contributors
Joined: Mar 2010
Posts: 3,099
Likes: 5
From: Los Angeles, CA
My Ride: BMW
Model Year: 2006
Patryk did the coding. What's strange is the messages showed up a couple of days after the coding session with Patryk. I remember I changed the microfilter a few months ago as well and managed to reset it for another 60K miles. For some reason that value is gone. Incidentally, going through the new vehicle service menus, I don't see the microfilter there. Just the blank triangle and empty "OK" thing. I hope to hear from Patryk soon.
Senior Members
Joined: Jan 2011
Posts: 694
Likes: 0
From: Socal
My Ride: BMW E60 M5
Model Year: 2010
Engine: S85
Patryk did the coding. What's strange is the messages showed up a couple of days after the coding session with Patryk. I remember I changed the microfilter a few months ago as well and managed to reset it for another 60K miles. For some reason that value is gone. Incidentally, going through the new vehicle service menus, I don't see the microfilter there. Just the blank triangle and empty "OK" thing. I hope to hear from Patryk soon.
Contributors
Joined: Jan 2010
Posts: 215
Likes: 0
From: Northern, NJ
My Ride: 550i SMG, HUD, Cold Weather/Sport Package, Mtech front bumper, Oem M5 rear bumper, V1 Concealed, RPI Scoop, 6000K HID both Fog and Headlight, M5 mirrors, LED interior lighting, M5 SMG Shift Knob, Eisenmann Sport Exhaust Quad Pipe, 30% Tint, Sprint B
Model Year: 2007
The CIC does not have the same service interval reminders as the old system. Have the programmer remove the micro filter service interval. This should correct the problem.
Senior Members
Joined: Jan 2011
Posts: 694
Likes: 0
From: Socal
My Ride: BMW E60 M5
Model Year: 2010
Engine: S85
Thread Starter
Contributors
Joined: Mar 2010
Posts: 3,099
Likes: 5
From: Los Angeles, CA
My Ride: BMW
Model Year: 2006
Wow this is old! Yes. As I recall, a few days later Patryk went back in and did some "cleanup" for the service errors. I'm not familiar with coding so unfortunately I won't be able to give more info on that.


