Low beam on, only after starting the engine
#1
Members
Thread Starter
Is there any possibility of coding the LMA to turn on the low beam ONLY AFTER the engine starts?
I saw this option even on low cost cars such as Chevrolet Aveo.
In my ex-car (VW Passat) i built an electronic module that made this work.
http://www.youtube.com/watch?v=73HzLz7XdRc
I assume that in BMW it's much easier, by simply changing any coding.
I saw this option even on low cost cars such as Chevrolet Aveo.
In my ex-car (VW Passat) i built an electronic module that made this work.
http://www.youtube.com/watch?v=73HzLz7XdRc
I assume that in BMW it's much easier, by simply changing any coding.
#2
Contributors
Join Date: Jul 2007
Location: Saint Louis, Missouri, USA
Posts: 1,100
Likes: 0
Received 1 Like
on
1 Post
My Ride: 2010 535i M Sport 6MT
Model Year: 2010
In E90 and E60, the low beam (Xenon or halogen) does not come on before engine on. Only the DRL (Corona / halogen hi-beam) comes on before engine on.
#3
Members
Thread Starter
In my E60 (LCI, 2008, adaptive xenon headlights), the low beam comes on even if i just turn the ignition on (and headlight switch is in "AUTO" or "headlight on" position). It's no need to start the engine.
It pisses me off.
If it's very cold and it feeds the glow plugs for 4-5 seconds, it also maintaines the headlights turned on.
I don't like this.
E60 low beam on - YouTube
It pisses me off.
If it's very cold and it feeds the glow plugs for 4-5 seconds, it also maintaines the headlights turned on.
I don't like this.
E60 low beam on - YouTube
Last edited by C_o_s_m_i_n; 10-01-2012 at 08:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
DavaiLave
E60 Discussion
13
08-02-2022 02:16 AM