internal headlight wiring crumbling
#1
Thread Starter
Members
Senior Members
Joined: May 2012
Posts: 2,539
Likes: 10
From: Tampa Bay, FL
My Ride: 530i
Model Year: 2004
Engine: M54
internal headlight wiring crumbling
I got my AE upgrade bulbs from ECS earlier this week. I took out the left headlight, removed the bulb access cover, and saw that the insulation for the wiring harness inside of the headlight is completely disintegrating! I am the second owner of the car; PO was elderly and had the car serviced at BMW of Sarasota for everything. I am literally the first non-dealer person to ever work on this car, so I know there wasn't anything else done to the headlights. I'll post some pictures in a bit. Anyone ever come across this before as well? '04, xenons. I looked online for any recall notices related to the headlights, and I didn't see anything.
I opened the access cover on the right headlight, saw the same thing. Needless to say I stopped doing anything until I show BMW what is going on.
I opened the access cover on the right headlight, saw the same thing. Needless to say I stopped doing anything until I show BMW what is going on.
Last edited by KyleB; 10-27-2012 at 11:36 AM.
#2
Thread Starter
Members
Senior Members
Joined: May 2012
Posts: 2,539
Likes: 10
From: Tampa Bay, FL
My Ride: 530i
Model Year: 2004
Engine: M54
***update***
insulated as much wiring as i could get to with 3M electrical tape. i could clearly see that the three wires going into the high beam bulb were the worst, and there is no way to get to all of it. I was pretty certain that once I got the headlight back in, I'd have a short and the bulb would be out - I guessed right. AE looks great, but it looks like I have a research project and a dealer visit in store. all other bulbs inside of the housing are working OK. I was able to dig up a couple of vague SIB descriptions for this, but not much more than that. This should NOT be happening on an 8 year old car.
insulated as much wiring as i could get to with 3M electrical tape. i could clearly see that the three wires going into the high beam bulb were the worst, and there is no way to get to all of it. I was pretty certain that once I got the headlight back in, I'd have a short and the bulb would be out - I guessed right. AE looks great, but it looks like I have a research project and a dealer visit in store. all other bulbs inside of the housing are working OK. I was able to dig up a couple of vague SIB descriptions for this, but not much more than that. This should NOT be happening on an 8 year old car.
#7
Thread Starter
Members
Senior Members
Joined: May 2012
Posts: 2,539
Likes: 10
From: Tampa Bay, FL
My Ride: 530i
Model Year: 2004
Engine: M54
#8
Senior Members
Joined: Jan 2011
Posts: 2,348
Likes: 3
From: UpState SC
My Ride: 2008 535i LCI with sports/premium package, Sports trans with paddle shifters, CF emblems, JB4 Software, Dinan Exhaust, Navigation, M5Tech body kit, Carbon wrap interrior trim and CIC Controller.
Thats amazing, just make sure that when you take your car in that you the approved bulbs installed. Otherwise, they will say you were running incorrect bulbs and this is the cause. Interesting to hear back from this. When I replaced my AE's I noticed that the wire casing seemed to be a bit harder than I would expect but I don't recall any breaking away. I will be having another look today to make sure.
The following users liked this post:
Carouser (05-18-2023)
#9
Members
Senior Members
Joined: Aug 2011
Posts: 259
Likes: 8
From: Baton Rouge, LA
My Ride: 2008 550i
Model Year: 2008
Same thing happened to both of my AE wires. I've come to expect many things BMW aren't made for long-term, or even short-term, durability. BMW likes to ride on the edge of the performance envelope...
#10
I did not. I am not tempted since car is under extended warranty for another while, I will wait till more of crap repairs accumulate. I am just lightheaded every time I have to deal with service advisor who has opinions but no knowledge on cars he is expected to advise on.
I did covered exposed wires with insulating tape.
I did covered exposed wires with insulating tape.