Hong Kong E60 sub-Forum
12-08-2011, 01:31 AM
Members
Join Date: Mar 2011
Location: Hong Kong
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
12-08-2011, 01:38 AM
Members
Join Date: Mar 2011
Location: Hong Kong
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
12-08-2011, 02:00 AM
Members
Join Date: Mar 2011
Location: Hong Kong
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Found out that the price for Brembo Zs is almost 45% less than the GT. The GT is about $30k hkd up... and the Zs are about $20k hkd this is just for the front.
I have done some searching and they are both mono block which is the same design. GT is for after market cars and Zs are for OEM cars I think but double check on this.
I dont know if the performance is the same in the 2. Like to know more on this.
Can you take photo and give Brembo a email and ask them what is the different on the 2 models.
I see that most sports cars are fitted with the Zs and not the GT.
I have done some searching and they are both mono block which is the same design. GT is for after market cars and Zs are for OEM cars I think but double check on this.
I dont know if the performance is the same in the 2. Like to know more on this.
Can you take photo and give Brembo a email and ask them what is the different on the 2 models.
I see that most sports cars are fitted with the Zs and not the GT.
Yes, for Zs its arround 2OK for full set.
For the custom-made rotor of mine it was even less, so I paid 5.5K expansive than a fair price.
fJ, don't recommend this garage to any member anymore, if I were you!
Just for you guys info,
GTs have round circles where the 6 pistons meet and an arc line that goes thru them, and the top middle has no bolt, and is same colour!
12-08-2011, 02:35 AM
Contributors
Join Date: Sep 2006
Location: Hong Kong
Posts: 21,274
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Mini Cooper
12-08-2011, 02:36 AM
Contributors
Join Date: Sep 2006
Location: Hong Kong
Posts: 21,274
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Mini Cooper
12-08-2011, 02:44 AM
Contributors
Join Date: Sep 2006
Location: Hong Kong
Posts: 21,274
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Mini Cooper
I have already know the price from the other garage that will install my quad-exhaust...
Yes, for Zs its arround 2OK for full set.
For the custom-made rotor of mine it was even less, so I paid 5.5K expansive than a fair price.
fJ, don't recommend this garage to any member anymore, if I were you!
Just for you guys info,
GTs have round circles where the 6 pistons meet and an arc line that goes thru them, and the top middle has no bolt, and is same colour!
Yes, for Zs its arround 2OK for full set.
For the custom-made rotor of mine it was even less, so I paid 5.5K expansive than a fair price.
fJ, don't recommend this garage to any member anymore, if I were you!
Just for you guys info,
GTs have round circles where the 6 pistons meet and an arc line that goes thru them, and the top middle has no bolt, and is same colour!
I must get a set from this guy also I can sell loads for him too.
I have 2 buyer what to buy new brakes
so for 20k I will get
2 x 6 pot front
2 x 2 pot rear
goodrich SS lines 1 set
brembo pads front and rear
12-08-2011, 04:22 AM
Contributors
Join Date: Nov 2007
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 BMW 520i E60 in Amethyst Gray
12-08-2011, 05:07 AM
Members
Join Date: Mar 2011
Location: Hong Kong
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
And the shop ( which's name start from letter Z ) told that the most reliable Brembo will be ordered by full set!
(otherwise, it's might be mouse-goods, no matter, I saw the package of mine were just a carton box WITHOUT the logo "Brembo")
For custom-made rotor, such as mine, any garage can offer 30K for 6-pot front & 4-pot rear, included the shop mentioned above.
And for the front, it's arround 17K installed! Which is why I am pissed off!
So FJ if you want a set, I can refer you this shop. I will go down this weekend to look one of member to install his full set of Brembo 405mm,
Of course, it is real GT
12-08-2011, 05:31 AM
Members
Join Date: Mar 2011
Location: Hong Kong
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Guys, just for your info,
As said I will install quad-exhaust from garage ( which's name start from letter "Z", as mentioned above).
Eisenmann Race quad 90mm x 4 at HK21,000.
This is recommended by one of our member, who will install Brembo there!
As said I will install quad-exhaust from garage ( which's name start from letter "Z", as mentioned above).
Eisenmann Race quad 90mm x 4 at HK21,000.
This is recommended by one of our member, who will install Brembo there!
