Hi there

I followed a DIY on the msport retrofit steering wheel onto a 2003 pre lci car. It was a great help and I have almost finished mine, one small problem though, on moving across the MLF box or airbag ECU, I fitted mine into the bottom spoke location how ever the wires accidentally popped out of the box. My problem Is I need to push them back into the white connector but in which order? There are 12 holes but only six wires, I'm hopping that some one might have a diagram or picture to help.

Any help would be great

Thanks

Rob.

 

You should probably post a pic so everyone will better understand what you need help with.

 

Your right I should have added a pic in the original post, here you go:

This is the white block that the 6 wires popped out of, there are 12 spaces inside the block connector


Another shot of the block


And the MLF airbag control module


f any one has an SE steering wheel and they wouldn't mind popping it open to take a pic of the wiring gong in to the MLF control module or if some one has a wiring diagram then I would really appreciate it if they could send me the details, They would be a real life saver

 

See if this helps

 

^^^ Thanks for the diagram ^^^^

Unfortunately neither the connector or part is numbered so its quite difficult to follow the diagram, if any one has a colour picture of the part then it would be a great help.

Thanks again

 

Any one?

 

Well I found what I was looking for from a friend of mine so I thought I would upload these images in case this happened to any one else

 

2008 retrofit Msport wheel complete on my 530D se 2004 :-)