Help!!!
08-14-2015, 05:54 PM
#1
New Members
Thread Starter
Join Date: May 2013
Location: Brooklyn
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 530I
Model Year: 2005
Help!!!
Hey guys,
I screwed up when doing a CIC upgrade and I think I shorted something out. (Didn't disconnect the battery - I know thats the 1st rule SMH)
The problem is the HD CID isnt getting any power. I tested and it only seems like one wire is getting power. All is tight so Im pretty sure I shorted something out I think I actually heard it short out.
I tested all fuses and they are all good.
Tho my CIC still works and ejects discs so I know thats not the problem I still checked my micro power module in the trunk.. I relocated it while back there.
The MPM looks fine however when I tested the wires only 3 of the 7 wires are live.
Can anyone help me with this? Maybe give me a diagram of the power wires
Any input will be greatly appreciated
Thanks guys and be nice I know I F***** UP
I screwed up when doing a CIC upgrade and I think I shorted something out. (Didn't disconnect the battery - I know thats the 1st rule SMH)
The problem is the HD CID isnt getting any power. I tested and it only seems like one wire is getting power. All is tight so Im pretty sure I shorted something out I think I actually heard it short out.
I tested all fuses and they are all good.
Tho my CIC still works and ejects discs so I know thats not the problem I still checked my micro power module in the trunk.. I relocated it while back there.
The MPM looks fine however when I tested the wires only 3 of the 7 wires are live.
Can anyone help me with this? Maybe give me a diagram of the power wires
Any input will be greatly appreciated
Thanks guys and be nice I know I F***** UP
Last edited by JayArras; 08-14-2015 at 07:25 PM.
