E6x SMG Paddle Shift Coding Protool
Thread Starter
New Members
Joined: Mar 2016
Posts: 26
Likes: 0
From: Montreal
My Ride: 2008 e61 xi m-package
Model Year: 2008
E6x SMG Paddle Shift Coding Protool
So after having done all the steps to do a SAT SMG Paddle shift conversion, I went the route of doing a small circuit board for the SMG paddle connectivity for those interested. My question can the paddle-shift be switched to active mode using the coding function of ProTool?
If so anyone want to enlighten me as to how?
Cheers all.
Nicd01
If so anyone want to enlighten me as to how?
Cheers all.
Nicd01
New Members
Joined: Jan 2020
Posts: 44
Likes: 2
From: Northumberland
My Ride: 530d msport Lci 2007
My apologies for answering a question that you didn't ask, but this info may help,
when carrying out the full sat conversion The last step is to make sure the EGS module is set correctly for paddles. If you have paddles, you want the following setting:
PADDLES=wert_01, If you do not have paddles on the steering wheel, you need to set it to PADDLES=wert_00
I have previously done this with NCS_Expert, I have no experience of Protool, I'm interested have you done a shifter conversion also or only the steering wheel paddles?
when carrying out the full sat conversion The last step is to make sure the EGS module is set correctly for paddles. If you have paddles, you want the following setting:
PADDLES=wert_01, If you do not have paddles on the steering wheel, you need to set it to PADDLES=wert_00
I have previously done this with NCS_Expert, I have no experience of Protool, I'm interested have you done a shifter conversion also or only the steering wheel paddles?
Thread
Thread Starter
Forum
Replies
Last Post
bahamutzyro
E60 Discussion
5
May 13, 2008 07:15 PM
