Diagnostice Software for E60 Opinions
#11
#12
Thread Starter
New Members
Joined: Apr 2013
Posts: 11
Likes: 0
From: New Mexico
My Ride: 2007, 530i, DTC
I received the BM Technic package, shipping to the States only took 3 days (!), and the loading was pretty easy. It did take about 30-45 minutes as it required some computer restarts. I would also recommend running each of the installed modules stand-alone before using it on your car as I had some additional software downloads necessary; I did this just to familiarize myself with the software, so I'm just passing what I noticed along.
I haven't used it on my car yet, but plan to this weekend.
I haven't used it on my car yet, but plan to this weekend.
#13
For diagnostic/calibration/resetting/etc i still use GT1 v57 on my 2010 550i , even it recognizes cars up to 2009
You just need the latest K-LINE interface with PIN 7-8 disconnected to work with it
90% modules will work ( for example I did active steering calibration after alignment , adaptation values tramsmission reset ), the latest modules will not work ( for example cant recognize iDrive CIC )
but i really dont want to touch them even
Not for coding
Last edited by champaign777; 05-11-2013 at 07:48 AM.
#14
Thread Starter
New Members
Joined: Apr 2013
Posts: 11
Likes: 0
From: New Mexico
My Ride: 2007, 530i, DTC
Just thought I'd give a update on my experience with the BM Technic. I also bought a Powermax, PMBC-75 power supply/battery charger so that I wouldn't have to worry about the battery dieing during troubleshooting.
I've been using DIS and INPA for checking faults and DIS is definitely much more powerful since it does provide troubleshooting guides and service information; if you haven't used it, it looks like TIS.
I just replaced the battery in my 530i and had to use NCS Expert to recode the car and DIS to register the battery. Everything went very smooth and the technical support from Chris at BM Technic was super; he was responding to my questions at 9 PM his time. He has the M3 Cutters forum (I hope this ok to say) were he has different threads on using the software and general BMW questions.
Overall, I'm pretty happy with this software, cable, and support and would definitely recommend it.
I've been using DIS and INPA for checking faults and DIS is definitely much more powerful since it does provide troubleshooting guides and service information; if you haven't used it, it looks like TIS.
I just replaced the battery in my 530i and had to use NCS Expert to recode the car and DIS to register the battery. Everything went very smooth and the technical support from Chris at BM Technic was super; he was responding to my questions at 9 PM his time. He has the M3 Cutters forum (I hope this ok to say) were he has different threads on using the software and general BMW questions.
Overall, I'm pretty happy with this software, cable, and support and would definitely recommend it.
#15
Most of the time paying upfront for the right hardware/software pays for itself. I bought cheap USB obd2 programmer before I knew anything about the software. I ended up spending one and a half weeks searching for DIS, looking for instructions and installing it on my computer.
#16
New Members
Joined: Aug 2013
Posts: 144
Likes: 0
From: San Ramon, CA
My Ride: 530i
Model Year: 2006
Engine: N52
I found on eBay a complete package of BMW GT1 OBD Diagnostic interface K+DCAN + BMW DIS v57 & SSS v32
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
#17
Members
Senior Members
Joined: Oct 2011
Posts: 465
Likes: 1
From: East Coast
My Ride: 04' 545, 6 Spd Manual, Blk Lthr, Sport Pkg, Sport Sts, Logic 7, Cold Wthr Pkg, Full L.E.D. Interior, Red Eng. Cvr, Mtech Front Bmpr, M5 Spoiler, Matte Blk Grill, Red Caps, Slttd & Drlld Rotors, 20
Model Year: 2004
I found on eBay a complete package of BMW GT1 OBD Diagnostic interface K+DCAN + BMW DIS v57 & SSS v32
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
#18
New Members
Joined: Aug 2013
Posts: 144
Likes: 0
From: San Ramon, CA
My Ride: 530i
Model Year: 2006
Engine: N52
Wow that's great news. Thank you.
I will look at that from him as well.
Mine is a 2006 so that should do it, but we might be buying a 2014 328 diesel.
So I may need the whole program.
Will the program you purchased allow mods etc to be done?
What about a cable?
I will look at that from him as well.
Mine is a 2006 so that should do it, but we might be buying a 2014 328 diesel.
So I may need the whole program.
Will the program you purchased allow mods etc to be done?
What about a cable?
#20
I found on eBay a complete package of BMW GT1 OBD Diagnostic interface K+DCAN + BMW DIS v57 & SSS v32
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
BMW Dealership software:
- BMW DIS v57 (Diagnostic Information System) used for diagnostic for cars before 2010
- BMW SSS v32 Progman (Software Service Station) used for programming for cars before 2006
- TIS (Technical Information System) containing all needed technical information
- INPA v5 & NCSExpert v3.1 used for diagnostic and codding for cars before 2010.
Package Includes-
• 2 x DVD's with DIS v57 & TIS, SSS v32, INPA Ediabas, NCSExpert 3.1
* software for F series and for cars after 2010 is not provided
• 1 x interface K+DCAN protocol
• 1 x Step-by-Step Guide with pictures + technical support over TeamViewer!
• 1 x Step-by-Step Video guide
Seller is "autodiagnostic-equipment "
Current eBay item #231087876001
Price is $89.00
Looks like a winner to me.
Anyone know of this?
Programming with k+dcan is a joke, it will take you days to program the whole car and the chance to brick a module is high.
If you can afford get the new Ista d/p and a quality icom clone. You can configure to use the icom with standard tools(inpa, ncsexpert, winkfp) and will be much faster than k+dcan