Car barely starts.. then dies on me
#11
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
![Default](https://5series.net/forums/images/icons/icon1.gif)
Ok black smoke points to a fuel issue or clogged air filter. Have you looked at your injector output? Injectors point back to the MOSFET issues the N54 has but you didn't have any of the codes so I can't definitively say it's the injectors or the DME MOSFETs causing your issues.
A smoke test is done with the car off and smoke being pumped into the intake. You look and see if smoke comes out any where and there you have a leak. You can get a cigar and tape a hose on the intake and blow smoke into it if you don't have a smoke test setup. You either have a bad leak somewhere if injector/MOFET issue. Did the engine over heat and if so how long was it over heating?
A smoke test is done with the car off and smoke being pumped into the intake. You look and see if smoke comes out any where and there you have a leak. You can get a cigar and tape a hose on the intake and blow smoke into it if you don't have a smoke test setup. You either have a bad leak somewhere if injector/MOFET issue. Did the engine over heat and if so how long was it over heating?
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
#12
Super Moderator
![](https://5series.net/forums/images/ranks/veteran_army.png)
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,622
Likes: 0
Received 317 Likes
on
304 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
![Default](https://5series.net/forums/images/icons/icon1.gif)
It's not even worth troubleshooting. You need a new engine. You never drive on an engine that's overheating. You cause more damage than just letting it sit and fixing it. These engines don't do well with over heating; none of the aluminum engines do especially overheating, cooling down rotation. If you do happen to get remotely working it will not last long.
#13
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
![Default](https://5series.net/forums/images/icons/icon1.gif)
It's not even worth troubleshooting. You need a new engine. You never drive on an engine that's overheating. You cause more damage than just letting it sit and fixing it. These engines don't do well with over heating; none of the aluminum engines do especially overheating, cooling down rotation. If you do happen to get remotely working it will not last long.
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
#14
Super Moderator
![](https://5series.net/forums/images/ranks/veteran_army.png)
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,622
Likes: 0
Received 317 Likes
on
304 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
![Default](https://5series.net/forums/images/icons/icon1.gif)
The MSD80/1 is for the N54. I don't believe I put M54 but yes you have a N54. You can try to work out your issues especially oil in the plug holes. I don't know the extent to which you drop it overheating but it is a big no no with aluminum engines.
If you have oil in the plugs then you need a valve cover gasket kit and some plugs. But as I stated above I wouldn't spend anything on the car unless it passes a compression test/leak down test.
If you have oil in the plugs then you need a valve cover gasket kit and some plugs. But as I stated above I wouldn't spend anything on the car unless it passes a compression test/leak down test.
Thread
Thread Starter
Forum
Replies
Last Post
tex_phil
E60, E61 Parts, Accessories and Mods
85
03-26-2010 06:02 AM
John@Motorcepts
E60, E61 Parts, Accessories and Mods
20
09-15-2009 09:46 AM