Camshaft sensor 2005 545i
#1
Members
Thread Starter
Join Date: Oct 2009
Location: Texas
Posts: 173
Likes: 0
Received 1 Like
on
1 Post
My Ride: Orient blue '05 545i, Sport/Premium Pkg, 6Speed MT, Xenon, Navi, Blue2th, PDC,
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi,
I just replaced the valve cover gasket and after I put everything back together I am getting Camshaft position sensor error P0365.
Car starts for few seconds and then it dies. I replaced the exhaust camshaft sensor (Febi), but I am still getting the same error.
Checked the wires and plugs. All looks good.
Any ideas?
I just replaced the valve cover gasket and after I put everything back together I am getting Camshaft position sensor error P0365.
Car starts for few seconds and then it dies. I replaced the exhaust camshaft sensor (Febi), but I am still getting the same error.
Checked the wires and plugs. All looks good.
Any ideas?
#2
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by dawid_w' post='1094394' date='Jan 20 2010, 05:54 PM
Hi,
I just replaced the valve cover gasket and after I put everything back together I am getting Camshaft position sensor error P0365.
Car starts for few seconds and then it dies. I replaced the exhaust camshaft sensor (Febi), but I am still getting the same error.
Checked the wires and plugs. All looks good.
Any ideas?
I just replaced the valve cover gasket and after I put everything back together I am getting Camshaft position sensor error P0365.
Car starts for few seconds and then it dies. I replaced the exhaust camshaft sensor (Febi), but I am still getting the same error.
Checked the wires and plugs. All looks good.
Any ideas?
#3
Members
Thread Starter
Join Date: Oct 2009
Location: Texas
Posts: 173
Likes: 0
Received 1 Like
on
1 Post
My Ride: Orient blue '05 545i, Sport/Premium Pkg, 6Speed MT, Xenon, Navi, Blue2th, PDC,
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by pauliehcfr' post='1094488' date='Jan 20 2010, 06:36 PM
Are you sure that you changed the correct one? There should be 2 exhaust cam sensors 1 for cylinders 1-4 and 1 for cylinders 5-8
#6
Members
Thread Starter
Join Date: Oct 2009
Location: Texas
Posts: 173
Likes: 0
Received 1 Like
on
1 Post
My Ride: Orient blue '05 545i, Sport/Premium Pkg, 6Speed MT, Xenon, Navi, Blue2th, PDC,
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by pauliehcfr' post='1096479' date='Jan 23 2010, 08:30 PM
Or perhaps its the wrong one. Meaning you installed an intake sensor in place of an exhaust
#7
Members
Thread Starter
Join Date: Oct 2009
Location: Texas
Posts: 173
Likes: 0
Received 1 Like
on
1 Post
My Ride: Orient blue '05 545i, Sport/Premium Pkg, 6Speed MT, Xenon, Navi, Blue2th, PDC,
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by pauliehcfr' post='1096476' date='Jan 23 2010, 08:22 PM
perhaps its an intake cam sensor?
#9
Members
Thread Starter
Join Date: Oct 2009
Location: Texas
Posts: 173
Likes: 0
Received 1 Like
on
1 Post
My Ride: Orient blue '05 545i, Sport/Premium Pkg, 6Speed MT, Xenon, Navi, Blue2th, PDC,
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by pauliehcfr' post='1097102' date='Jan 24 2010, 08:51 PM
I was thinking that perhaps it was a faulty intake cam sensor instead of an exhaust sensor. what are you using to clear the code?
#10
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hmmm, thats a good system for diagnosing. Does that sensor have the wire harness attached or is it the sensor only with a plug connector? perhaps you pinched the wire harness when reinstalling the valve cover? without physically seeing the car, I'm shooting in the dark here. Perhaps you replaced the wrong sensor. Not to insult your capability, but the exhaust cam is the one closest to the fenders and the intake cam is the one closest to the middle of the engine. I personally have never replaced them. Does the fault description say anything other than exhaust cam sensor bank B?