545i Very Strange Issue... Please help
08-31-2016, 04:20 PM
#11
New Members
Thread Starter
Join Date: Oct 2013
Location: Texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 545i Sport Oxford Green
All cleaned up and ready to go with no errors. Glad the DME cloning went well. Hope I never have to deal with that crud again.
09-01-2016, 05:37 AM
#13
New Members
Thread Starter
Join Date: Oct 2013
Location: Texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 545i Sport Oxford Green
Actually yes. One fuse wasn't burt, but rather cracked and very hard to tell it was bad.. And onother was non existent... Seems I put it into the adjacent unused slot.
Putting one in the wrong place dont surprise me... I just had to replace the dme because the pin controlling the fan was corroded and I had pulled every single fuse prior to finding the issue. If I recall, it was 104 degrees in TX that day.
Putting one in the wrong place dont surprise me... I just had to replace the dme because the pin controlling the fan was corroded and I had pulled every single fuse prior to finding the issue. If I recall, it was 104 degrees in TX that day.
09-02-2016, 04:24 PM
#15
New Members
Thread Starter
Join Date: Oct 2013
Location: Texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 545i Sport Oxford Green
I found a guy on youtube from Dallas that was doing DME cloning... I sent him my original dme, used dme from ebay ($100), the CAS module, and the keys to the car. He 'Cloned' the dme, set the vin and some rolling code matched to the keys and cas.. About all I know. I received it all back and everything works just fine. Cloning cost me $240, so $340 total with used dme.
Thread
Thread Starter
Forum
Replies
Last Post
Johnnywadd
Private Member Classifieds
0
09-03-2015 01:23 PM
bimmerspeed
Frequently Asked Questions
1
09-01-2015 05:09 PM