545 owners, what's the thin pipe connected to the exhaust right ti
#1
Senior Members
Thread Starter
Join Date: Feb 2008
Location: Livingston, New Jersey
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
I was at the shop to installed my SUPERSPRINT exhaust but found out BMPsesign/SUPERSPRINT did not give me all necessary parts. Therefore, I took the exhaust and go home. They promised will overnight the rest of the parts to the shop today which they should have them by tomorrow.
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
#2
Senior Members
Thread Starter
Join Date: Feb 2008
Location: Livingston, New Jersey
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by k Wang' post='572051' date='May 1 2008, 12:23 AM
I was at the shop to installed my SUPERSPRINT exhaust but found out BMPsesign/SUPERSPRINT did not give me all necessary parts. Therefore, I took the exhaust and go home. They promised will overnight the rest of the parts to the shop today which they should have them by tomorrow.
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
#3
Contributors
Join Date: Oct 2007
Location: Thousand Oaks, California
Posts: 11,084
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 550i Jet Black on Black Leather, SAT with Paddles, Logic 7, Comfort Seats, NAV, Sport Package, PDC, Xenons, Sirius, Trinity 12W LED Angel Eyes, RPi GT Exhaust, M rear spoiler, ACS Roof Spoiler, Tinted Tail Lights, Bimmian Carbon Fiber Pillar Trim, Bimmian Shadow 550i emblem, RPi Scoop, E60 Forum Cling, Mtec bulbs in fog lights, Mtec 2W LED for License Plate Light Bulbs, K&N Filter, Bimmian LED Smoked Side Markers, Blackout roundels, Carbon Fiber Kidney Grills.
Retired Rides - 1989 325i convertible, 1995 M3, 2002 X5, 2005 545i, 2008 X5 (Lemon)
Originally Posted by k Wang' post='572051' date='Apr 30 2008, 09:23 PM
I was at the shop to installed my SUPERSPRINT exhaust but found out BMPsesign/SUPERSPRINT did not give me all necessary parts. Therefore, I took the exhaust and go home. They promised will overnight the rest of the parts to the shop today which they should have them by tomorrow.
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
While my car was on the lift, I noticed there's thin black pipe connect to the right exhaust tip. What's that for? After installed the SUPERSPRINT exhaust, what about the pipe? There seems no where to connect the thin pipe and the stuff looks like some kind of sensor to the SUPERSPRINT exhaust? Will this cause any error message?
I believe anyone installed aftermarket exhaust should aware of this. Any idea?
Thank you.
Kevin
#4
Former Vendor
Join Date: Dec 2007
Location: Anaheim, CA
Posts: 3,624
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F10 M5
Model Year: 2013
Originally Posted by flyingpuck' post='572123' date='Apr 30 2008, 11:31 PM
I think it's a vacuum line to open and close off one of the mufflers depending upon whether it's cold or not. Usually it would be blocked with a screw or something if it's not in use with the new exhaust. Hope this helps!
Correct!
#5
Senior Members
Thread Starter
Join Date: Feb 2008
Location: Livingston, New Jersey
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by flyingpuck' post='572123' date='May 1 2008, 02:31 AM
I think it's a vacuum line to open and close off one of the mufflers depending upon whether it's cold or not. Usually it would be blocked with a screw or something if it's not in use with the new exhaust. Hope this helps!
#6
Contributors
Join Date: Nov 2007
Location: H-town
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Carbon Black 545i
The shop should take care of it
if they have done an e60 before.
If not you can do it yourself.
Some members already take it off
the exhaust and plug it for a slightly
different sound on their exhaust.
if they have done an e60 before.
If not you can do it yourself.
Some members already take it off
the exhaust and plug it for a slightly
different sound on their exhaust.
#7
Senior Members
Thread Starter
Join Date: Feb 2008
Location: Livingston, New Jersey
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GQuK545i' post='572306' date='May 1 2008, 12:25 PM
The shop should take care of it
if they have done an e60 before.
If not you can do it yourself.
Some members already take it off
the exhaust and plug it for a slightly
different sound on their exhaust.
if they have done an e60 before.
If not you can do it yourself.
Some members already take it off
the exhaust and plug it for a slightly
different sound on their exhaust.
When you said plug it for a slightly different sound on their exhaust, did you mean the OEM exhaust?
I will ask the shops opinion of how to take care of the pipe. But I am pretty sure they did not do any job on an e60 before.
#8
Contributors
Join Date: Jan 2008
Location: Miami
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 545/6
Originally Posted by k Wang' post='572324' date='May 1 2008, 12:56 PM
When you said plug it for a slightly different sound on their exhaust, did you mean the OEM exhaust?
I will ask the shops opinion of how to take care of the pipe. But I am pretty sure they did not do any job on an e60 before.
I will ask the shops opinion of how to take care of the pipe. But I am pretty sure they did not do any job on an e60 before.
the pump for the suction is located in the trunk beneath the tailight, you can pull the pipe back into the trunk (so it won't dangle) and use a golf tee or similar to plug it.
-felix
#9
Contributors
Join Date: Dec 2007
Location: Calgary, AB - Canada / Buenos Aires - Argentina
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 BMW M5
check this out: http://forums.e60.net/index.php?showtopic=53789
It is a DIY for cheap/easy Quad Exhaust installed for non-M5. Very detailed
It is a DIY for cheap/easy Quad Exhaust installed for non-M5. Very detailed
#10
Senior Members
Thread Starter
Join Date: Feb 2008
Location: Livingston, New Jersey
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fvicente' post='572370' date='May 1 2008, 01:46 PM
make sure either they plug it or you do, as you will get a check engine light later if you don't.
the pump for the suction is located in the trunk beneath the tailight, you can pull the pipe back into the trunk (so it won't dangle) and use a golf tee or similar to plug it.
-felix
the pump for the suction is located in the trunk beneath the tailight, you can pull the pipe back into the trunk (so it won't dangle) and use a golf tee or similar to plug it.
-felix
Please forgive my English as it is not my first language.
So from my understanding, after the new exhaust installed, the pipe will be hanging around with the end open to the air since it no longer connected to the OEM exhaust. Therefore, I will definitely need to plug something at the end of the pipe or I will get warning message. Correct?