Removing the swirl flaps in a diesel engine
#11
Contributors
Join Date: Jun 2003
Location: Turku, Finland
Posts: 1,398
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 BMW 530d M-Sport TouringExterior: Titansilber Metallic, M5 mirrors, ACS rear roof spoiler, BMW Carbon Fiber rear diffuser, Adaptive Xenon headlights, AngeliBright v.3 Angel Eyes, F1 Autohaus Euphoria 6000K LED license plate lightsInterior: Black
![Default](https://5series.net/forums/images/icons/icon1.gif)
That is one hell of a DIY write-up!
And the actual work looks so frightening that I would be happy to drive to Kajaani and pay you (in beer) to do it for me!
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
And the actual work looks so frightening that I would be happy to drive to Kajaani and pay you (in beer) to do it for me!
![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
#12
Contributors
Thread Starter
Join Date: Apr 2007
Location: Kajaani, Finland
Posts: 5,851
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: Bmw 530d 2004
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by Patrick E61' post='787865' date='Feb 8 2009, 07:43 PM
That is one hell of a DIY write-up!
And the actual work looks so frightening that I would be happy to drive to Kajaani and pay you (in beer) to do it for me!![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
And the actual work looks so frightening that I would be happy to drive to Kajaani and pay you (in beer) to do it for me!
![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
But I think there are some folks near you who could do it. Even some dealers do it nowadays!
#13
Contributors
Join Date: Jun 2003
Location: Turku, Finland
Posts: 1,398
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 BMW 530d M-Sport TouringExterior: Titansilber Metallic, M5 mirrors, ACS rear roof spoiler, BMW Carbon Fiber rear diffuser, Adaptive Xenon headlights, AngeliBright v.3 Angel Eyes, F1 Autohaus Euphoria 6000K LED license plate lightsInterior: Black
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by Anzafin' post='787874' date='Feb 8 2009, 08:03 PM
I would do it for a beer
!
But I think there are some folks near you who could do it. Even some dealers do it nowadays!
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
But I think there are some folks near you who could do it. Even some dealers do it nowadays!
![Cool](https://5series.net/forums/images/smilies/imported/cool.gif)
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
Actually, I will ask about this from Metro Auto the next time that I go there. The service manager is very good at what he does (and drives an E60!), so it will be interesting to see if he knows about this issue.
#14
Members
Join Date: Nov 2008
Location: Scotland
Posts: 148
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E61 sold nice E91 335i Sport Touring now
![Default](https://5series.net/forums/images/icons/icon1.gif)
I did this on my 320d but as far as I know the 2.5d engine doesn't have them. Definately gives you peace of mind but I did notice the lag was worse after doing this. Probably not as big an issue with the 3.0d over the 2.0d though.
#15
Contributors
Thread Starter
Join Date: Apr 2007
Location: Kajaani, Finland
Posts: 5,851
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: Bmw 530d 2004
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by chesney72' post='787890' date='Feb 8 2009, 08:19 PM
I did this on my 320d but as far as I know the 2.5d engine doesn't have them. Definately gives you peace of mind but I did notice the lag was worse after doing this. Probably not as big an issue with the 3.0d over the 2.0d though.
#16
Contributors
Thread Starter
Join Date: Apr 2007
Location: Kajaani, Finland
Posts: 5,851
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: Bmw 530d 2004
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by Patrick E61' post='787888' date='Feb 8 2009, 08:16 PM
Sure, but doing it locally would, A) deny you free beer, and,
deny me a long drive up north!
Actually, I will ask about this from Metro Auto the next time that I go there. The service manager is very good at what he does (and drives an E60!), so it will be interesting to see if he knows about this issue.
![Cool](https://5series.net/forums/images/smilies/imported/cool.gif)
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
Actually, I will ask about this from Metro Auto the next time that I go there. The service manager is very good at what he does (and drives an E60!), so it will be interesting to see if he knows about this issue.
![Think](https://5series.net/forums/images/smilies/imported/think.gif)
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
You go and ask and immediately report here hehe!
I guess they say that the flaps can't broke in reinforced system. I doubt that since someone told on the BTCF forum about a 2005 535d which was broken caused by swirl flap failure.
#17
Members
Join Date: Jan 2009
Location: County Durham UK
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E61 525DSE Auto Touring.
2004 54 plate
Metalic saffire Black,
Active Steering.
18 Inch Style 124 Alloys,
falken 452s
Beige Leather
Dark Poplar Wood Trim
xenon bulb upgrade
blutooth phone prep
![Default](https://5series.net/forums/images/icons/icon1.gif)
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
#18
Contributors
Join Date: Oct 2008
Location: london england
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
ok...are you ready for this......................
all went fine with the 530d about 4 hours start to finnish
now the 535d...
not so easy...and its still in bits, let me explain.....
everything came apart easily, but on removing the inlet manifold top, i caught it on a pipe and jogged it a bit......and one of the orange round rubber seals (with the metal washer attached to it) came off....and i cant find it anywhere
i have looked all over the engine bay......i have removed the large under tray to look underneath...
the only thing i can think of is.......its fallen into the inlet hole on the cylinder head..
i have tried to look/poke and used a flexable magnet but to no avail...i am slightly worried to say the least, if it is in there i can not put her back together because that would be catastrophic for the engine....but if its not, ie: sitting somewhare else, i dont want to strip the head down, as its a major job....dilema, i am going to look again tomorrow with better light......
ironic that this job was to prevent bits falling into the inlet chamber.
oh, and my swirl flaps are compleatly different to your pics.
they have seperate flaps not connected to the housing like yours. i will post pics tomorrow (low priority at the moment
how deep is the inlet holes into the head? any ideas on how to check if its in there?
might nick a endascope from work
help.............
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
all went fine with the 530d about 4 hours start to finnish
now the 535d...
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
everything came apart easily, but on removing the inlet manifold top, i caught it on a pipe and jogged it a bit......and one of the orange round rubber seals (with the metal washer attached to it) came off....and i cant find it anywhere
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
i have looked all over the engine bay......i have removed the large under tray to look underneath...
the only thing i can think of is.......its fallen into the inlet hole on the cylinder head..
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
i have tried to look/poke and used a flexable magnet but to no avail...i am slightly worried to say the least, if it is in there i can not put her back together because that would be catastrophic for the engine....but if its not, ie: sitting somewhare else, i dont want to strip the head down, as its a major job....dilema, i am going to look again tomorrow with better light......
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
ironic that this job was to prevent bits falling into the inlet chamber.
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
oh, and my swirl flaps are compleatly different to your pics.
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
![Tongue](https://5series.net/forums/images/smilies/imported/tongue.gif)
how deep is the inlet holes into the head? any ideas on how to check if its in there?
might nick a endascope from work
![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
help.............
#19
Contributors
Join Date: Sep 2007
Location: South Florida
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 535i w/ Sports & Permium Pkg. Silv/Blk
2008 VW R32 w/Nav.
1992 VW Corrado Silv/Blk-retired
2001 530i Sports/Premium-retired
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by Dr Dave' post='788041' date='Feb 8 2009, 05:13 PM
ok...are you ready for this......................
all went fine with the 530d about 4 hours start to finnish
now the 535d...
not so easy...and its still in bits, let me explain.....
everything came apart easily, but on removing the inlet manifold top, i caught it on a pipe and jogged it a bit......and one of the orange round rubber seals (with the metal washer attached to it) came off....and i cant find it anywhere
i have looked all over the engine bay......i have removed the large under tray to look underneath...
the only thing i can think of is.......its fallen into the inlet hole on the cylinder head..
i have tried to look/poke and used a flexable magnet but to no avail...i am slightly worried to say the least, if it is in there i can not put her back together because that would be catastrophic for the engine....but if its not, ie: sitting somewhare else, i dont want to strip the head down, as its a major job....dilema, i am going to look again tomorrow with better light......
ironic that this job was to prevent bits falling into the inlet chamber.
oh, and my swirl flaps are compleatly different to your pics.
they have seperate flaps not connected to the housing like yours. i will post pics tomorrow (low priority at the moment
how deep is the inlet holes into the head? any ideas on how to check if its in there?
might nick a endascope from work
help.............
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
all went fine with the 530d about 4 hours start to finnish
now the 535d...
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
everything came apart easily, but on removing the inlet manifold top, i caught it on a pipe and jogged it a bit......and one of the orange round rubber seals (with the metal washer attached to it) came off....and i cant find it anywhere
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
i have looked all over the engine bay......i have removed the large under tray to look underneath...
the only thing i can think of is.......its fallen into the inlet hole on the cylinder head..
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
i have tried to look/poke and used a flexable magnet but to no avail...i am slightly worried to say the least, if it is in there i can not put her back together because that would be catastrophic for the engine....but if its not, ie: sitting somewhare else, i dont want to strip the head down, as its a major job....dilema, i am going to look again tomorrow with better light......
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
ironic that this job was to prevent bits falling into the inlet chamber.
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
oh, and my swirl flaps are compleatly different to your pics.
![Embarrassment](https://5series.net/forums/images/smilies/imported/ohmy.gif)
![Tongue](https://5series.net/forums/images/smilies/imported/tongue.gif)
how deep is the inlet holes into the head? any ideas on how to check if its in there?
might nick a endascope from work
![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
help.............
I was just about to suggest an endoscope......some repair shops have them...maybe you can rent one.....hope you find it in better lighting.
#20
Contributors
Join Date: Oct 2008
Location: london england
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
girlfriends already given me a hard time...."why did you do that to your car when it was fine???"
in the morning im going to have a good look, and if no joy im going to tyr to hire a fibrescope or small endoscope, and have a look. better to be safe than sorry.
i bet it turns up in my pocket or something
still its not the end of the world.
and when done ill have peice of mind again.
in the morning im going to have a good look, and if no joy im going to tyr to hire a fibrescope or small endoscope, and have a look. better to be safe than sorry.
i bet it turns up in my pocket or something
![Laughing](https://5series.net/forums/images/smilies/imported/laughing.gif)
still its not the end of the world.
and when done ill have peice of mind again.