ramp suggestions
#1
Members
Thread Starter
Join Date: Jun 2008
Location: San Antonio
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
guys,
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
#2
Originally Posted by phocker' post='689706' date='Oct 10 2008, 01:41 AM
guys,
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
#3
Senior Members
Join Date: Mar 2006
Location: Pittsburgh, PA
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2013 M5 - Sakhir Orange / Black Leather.
Originally Posted by phocker' post='689706' date='Oct 10 2008, 02:41 AM
guys,
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
I'd like to use a ramp to do my oil change. any suggestions on ramp makers? I heard about rhino, but i wanted to make sure i get a ramp that my car can clear and still be high enough room to do the change. Please let me know.
1. Buy two planks - 10" x 1" x 3'. Lay them in front of the Rhinos and drive up on them. That will lift the front of the car and the lip of the mtech enough to avoid rubbing as you pull up the ramps.
2. Get a low slung floor jack and use it to jack the front end using the jack pad under the engine cradle. Get the car high enough in the air then slide the Rhino's under the tires.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Meet & Greet Discussion
2
10-16-2015 03:07 PM