nunorsilva

Hi.

Here's what I've successfully coded on my 2009 E61:

CAS:

VERRIEGELUNGSSCHWELLE Automatic locking doors speed wert_02 (5 km/h)


IHKA:

GEBL_ANZEIGE_AUTO Ventilation speed indicator aktiv
ABWAHL_AC Keep AC off even when turning on the car (except when in AUTO mode) aktiv
UMLUFT_MEMORY Remember last ventilation speed aktiv


KOMBI:

BC_LEERZEILE Remove blank line from BC nicht_aktiv
BC_DIGITAL_V Real Digital speed on BC aktiv
CC_TEMPERATURWARNUNG Temperature warning (high, low ?) aktiv


LMA:

MIND_ANZ_ZYKL_TIPP_BLK Soft touch turn signal

Brake and fog lights blink on force breaking
BFD_1_RL_BL_1_ERSCH_BILD wert_03
BFD_1_RL_BL_2_ERSCH_BILD wert_03
BFD_1_BL_M_ERSCH_BILD wert_03
BFD_1_RL_BL_ERSCH_BILD wert_03
BFD_1_NSL_ERSCH_BILD wert_03

PWM_FL_NSW_FKT_ABBLIEGELI In AUTO mode, fog lights turn on on slow curves and on turn signal wert_02
WL_NSW In AUTO mode, fog lights turn on with welcome lights soft_einschalten
PWM_AN_SL_V_AL_1_34 Angel Eyes intensity wert_03


MASK

AMBANDS Skip AM band aktiv


SHD

REGENSCHLIESSEN With rain sensor on, close sunroof on wiper activation aktiv
REGENSCHLIESSENTILT With rain sensor on, close tilted sunroof on wiper activation aktiv


Regards,

Nuno Silva

imagine

Can someone help me code my car? I live in California, SF Bay Area. Another solution would to use a remote application that allows you to control my computer and code it when I set up the software properly? Anyone help please!

SD5Series

Anyone know what the codes are to enable the bluetooth to show the contacts? Mine was working, but when we loaded Rizbel's profile which didn't have bluetooth or Aux-in on his car, it disabled mine whicha already had those options. He was able to get the bluetooth and aux enabled again, but we couldn't still see the contacts on my phone on the idrive. What files need to be fixed? https://5series.net/forums/topic/125...2#entry1459292

SD5Series

how can you default your code settings back to factory settings?

hollow

recode car with ncs expert profile with a blank .man file

or just recode the exact module you require with blank .man file

C_o_s_m_i_n

That is correct. I already did that and it works.

stecom90

It is not advisable to code with a blank .man

you must use backups made ??at the first reading of the module, fsw_psw profile.
or
Expertmode Profile> sg_codieren

txag_530i

That's not a good idea. You should do it as described here: coding-any-ECU-with-the-car-VO-factory-default-settings-using-NCS-expertmode-profile

AchtungE60

Why is it not a good idea? These guys at BMW coding are a complete joke. derivatives of derivatives. I've seen posts on there from "mods" that leave me astonished. I've done the above on over 200+ cars. I always do this before I change any options. It's simply a managment file and allows the vehicle to default back the vehicle's original config (VO) so before learning from newbies on the internet maybe you should ask "why not?". I bet you will not even get an intelligent answer.

BLooD

Yup, if you ask any thing over BMW coding you get " I know how to do it but I im not showing you" answer because information is money to them.