My DIY 5 min fog light install...
#101
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi, I will be doing this one with the PIAA ION CRYSTAL (Yellow) Bulbs, They show 2 choices for the fogs, both are 55 watt bulbs but one has a (13516) 110 watt output and the other (13555) an 85 watt output. Both appear the same color, but one has more light.. Can anyone confirm if either would work or cause a problem (too much heat???, etc.). Note both are the single bulb part numbers.
Thanks
Thanks
#102
#103
Senior Members
Join Date: Mar 2007
Location: Huntington Beach, CA & Scottsdale, AZ
Posts: 2,850
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
Did the fog install (PIAA 4150k Xenon white), DIY is perfect. It is less than 5 minutes a side. Here is a pic of the final product.
#104
![Default](https://5series.net/forums/images/icons/icon1.gif)
Can you help? I have a 535d and I need to get the whole front fog light assembly out of the spoiler so I can dry out the lenses having driven through some of the recent floods in UK. Can I do this from the front or is my only option to access it from the back via the wheel arch liner?
By the way the E60 works fine as a boat!!
By the way the E60 works fine as a boat!!
#105
Senior Members
Join Date: Aug 2007
Location: USA
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i E60 Orient Blau Metallic
Premium, NAV, Winter Package, Heads Up Display, Logic 7 Audio, AngeliBright Upgrade [White], M5 Body Kit, M Embroidered Seats
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by ch7656' post='73891' date='Dec 30 2004, 07:54 PM
Lots of good posts out there on this subject?thought I would share my technique with you. In the end it took me about 5 mins per side.
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387
#106
Senior Members
Join Date: Aug 2007
Location: USA
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i E60 Orient Blau Metallic
Premium, NAV, Winter Package, Heads Up Display, Logic 7 Audio, AngeliBright Upgrade [White], M5 Body Kit, M Embroidered Seats
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by ch7656' post='73891' date='Dec 30 2004, 07:54 PM
Lots of good posts out there on this subject?thought I would share my technique with you. In the end it took me about 5 mins per side.
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387
1. What bulbs did you use exactly? Did they give you issues with the OBC? I have an 2005 545i E60 and do not want for this to be an issue. I am looking at getting PIAA Xtreme Light Plus Part # 19616. Here's the link: http://www.shopatron.com/product/par...er=19616/353.0
Your thoughts?
#107
Contributors
Join Date: Oct 2007
Location: Thousand Oaks, California
Posts: 11,084
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 550i Jet Black on Black Leather, SAT with Paddles, Logic 7, Comfort Seats, NAV, Sport Package, PDC, Xenons, Sirius, Trinity 12W LED Angel Eyes, RPi GT Exhaust, M rear spoiler, ACS Roof Spoiler, Tinted Tail Lights, Bimmian Carbon Fiber Pillar Trim, Bimmian Shadow 550i emblem, RPi Scoop, E60 Forum Cling, Mtec bulbs in fog lights, Mtec 2W LED for License Plate Light Bulbs, K&N Filter, Bimmian LED Smoked Side Markers, Blackout roundels, Carbon Fiber Kidney Grills.
Retired Rides - 1989 325i convertible, 1995 M3, 2002 X5, 2005 545i, 2008 X5 (Lemon)
![Default](https://5series.net/forums/images/icons/icon1.gif)
This DIY was great! One note however, if the car in question has headlight washers, it is a bit more difficult to swap out the bulb on the driver's side. All in all though, it was easy, straightforward and well explained by all of the pictures. Thanks again!
![Thumbsup](https://5series.net/forums/images/smilies/imported/thumbsup.gif)
#109
Contributors
Join Date: Sep 2007
Location: Encino, CA
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 04 545i - Titanium Silver/Black, Sport pkg, Comfort Seats w/ Lumbar, Premium Sound, power rear sunshade, Adaptive Xenon Headlights, Steptronic, Park Distance Control, Fold down rear seats w/ski bag, Aux jack, 6-disk changer, puddle lamps...
Engine: Custom Remus cat-back exhaust w/chrome square tips, K&N Air Filter, Charcoal Filter Removed, Sprint Booster :-), 50/50 mix of 91+100 Octane, EuroRev ECU Remap (coming soon lol), Dinan High-Flow Throttle Body (coming soon...maybe lol)
Interior: Portable Sirius Stilletto 100 w/car kit, Garmin Nuvi 680 mounted below rear-view mirror, LCI-style I-drive knob, Dark Poplar Center Dashboard Trim.
Exterior: E60 forum clings, 5% rear tint, ACS roof spoiler (painted black for distinct look against limo tint), ACS trunk spoiler, ACS add-on front spoiler and rear apron (awaiting installation), "18 Black Staggered BeBeS Style OER (emergency replacement for cracked sport 124 rims), black kidney grill, white accessory lighting (including license and trunk lamps), Angel-eye upgrade, AIB xenon-matched fog lamps, AIB V3's on order, red rear reflectors
![Default](https://5series.net/forums/images/icons/icon1.gif)
Originally Posted by 2004fiveseries530i' post='564449' date='Apr 19 2008, 07:54 PM
I would love to do this mod as well. what size bulbs I have to get? I am thinking the piaa yellow bulbs. will I get the error message on the screen? please help. many thanks!
Welcome to the forums! Though your name is 2004 530i, it'll help us help you if you update your profile and sig info with location, model, and year as a minimum. Some may not realize the details are in your name. Thanks!
I just changed my foggies with AIB Xenon-Matched - what a difference! For the pre-LCI series, 9006 bulbs are standard - the same bulb as many US main headlight (and even the E36 Beemer headlight).
#110
![Default](https://5series.net/forums/images/icons/icon1.gif)
![Cool](https://5series.net/forums/images/smilies/cool.gif)
Originally Posted by ch7656' post='73891' date='Dec 30 2004, 06:54 PM
Lots of good posts out there on this subject?thought I would share my technique with you. In the end it took me about 5 mins per side.
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387
Using an 8mm socket remove these 4 screws
Attachment 4381
Here's another shot of 2 of the 4 screws
Attachment 4382
Using a Phillips loosen/remove these two fasteners (belly pan)
Attachment 4380
Slightly pull the wheel liner out
Attachment 4383
Another shot of the wheel liner pulled out
Attachment 4384
Pull the lower corner liner down and you?ll have easy access to the bulb?that?s it!
Attachment 4385
Here are the lights I used (about $65 on eBay /oem on left for comparison)
Attachment 4379
Here are a couple daytime pics of the results...
Attachment 4386
Attachment 4387