Homemade LED taillight adapter
#1
Senior Members
Thread Starter
Join Date: Oct 2007
Location: Denmark
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW e60 525IA 12/2003
Hi
On request from GENEaTALS , here a littel DIY , for the people that want to fit Org. BMW LED number plate tailligth's and don't have the opportunity of getting the adapter from BruceMiranda ( shiping cost to Europ cost more than the adapter's themself ).
There should be no doubt that Bruce deliver them more professional done , so I hope no hard feeling's becourse of my littel DIY Bruce
You will need :
2 x LED number plate taillights BMW Part no. : 63 27 7 193 293 / 15-20 USD/ a pice
2 x 24Volt/2Watt bulb's 2-3 USD/ a pice
4 x Female wire Pin's , BMW part no. : 61 13 1383 776 / 1-2 USD for 4 pice
4 x Male wire Pin's , BMW part no. : 61 13 1376 191 / 1-2 USD for 4 pice
2 x 20 cm wire in 2 different color's
10 cm ?10 heat flex
20cm ?5mm heat flex
Now follow the pitcure's ( you have to make 2 adapter's , one for each number plate tallight )
On request from GENEaTALS , here a littel DIY , for the people that want to fit Org. BMW LED number plate tailligth's and don't have the opportunity of getting the adapter from BruceMiranda ( shiping cost to Europ cost more than the adapter's themself ).
There should be no doubt that Bruce deliver them more professional done , so I hope no hard feeling's becourse of my littel DIY Bruce
You will need :
2 x LED number plate taillights BMW Part no. : 63 27 7 193 293 / 15-20 USD/ a pice
2 x 24Volt/2Watt bulb's 2-3 USD/ a pice
4 x Female wire Pin's , BMW part no. : 61 13 1383 776 / 1-2 USD for 4 pice
4 x Male wire Pin's , BMW part no. : 61 13 1376 191 / 1-2 USD for 4 pice
2 x 20 cm wire in 2 different color's
10 cm ?10 heat flex
20cm ?5mm heat flex
Now follow the pitcure's ( you have to make 2 adapter's , one for each number plate tallight )
#2
Contributors
Join Date: Jul 2007
Location: Nashville
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 530i Alpine White with Navi and Premium PackageIn progress: OEM Mtech kit, H&R Sport Springs, and 19
Ben you are the man. With posts like these we will continue to grow as a strong e60 resource. Thanks to all of you guys that do this type of grunt work...
#3
Contributors
Join Date: Oct 2007
Location: Thousand Oaks, California
Posts: 11,084
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 550i Jet Black on Black Leather, SAT with Paddles, Logic 7, Comfort Seats, NAV, Sport Package, PDC, Xenons, Sirius, Trinity 12W LED Angel Eyes, RPi GT Exhaust, M rear spoiler, ACS Roof Spoiler, Tinted Tail Lights, Bimmian Carbon Fiber Pillar Trim, Bimmian Shadow 550i emblem, RPi Scoop, E60 Forum Cling, Mtec bulbs in fog lights, Mtec 2W LED for License Plate Light Bulbs, K&N Filter, Bimmian LED Smoked Side Markers, Blackout roundels, Carbon Fiber Kidney Grills.
Retired Rides - 1989 325i convertible, 1995 M3, 2002 X5, 2005 545i, 2008 X5 (Lemon)
WOW! What a great DIY, thanks BenAnd!
#5
Super Moderator
Join Date: Jan 2008
Location: So. Cal (SFV)
Posts: 17,508
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2011.5 Alpine White E90 M3 | Black Novillo Leather | Carbon Fiber Leather Trim | ZCP | ZP2 | M-DCT | Navigation | Moonroof | 6FL Mods: TMS 12.5mm spacers all around l Hawk HPS Brake Pads l OEM M3 Edition Grills l Paint Matched Side Gills l Key Hole D
excellent write up ben...thanx for sharing
#8
Senior Members
Thread Starter
Join Date: Oct 2007
Location: Denmark
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW e60 525IA 12/2003
Originally Posted by schulrog' post='753253' date='Dec 26 2008, 11:05 PM
very good! won't the bulb melt the electrical tape?
Hi
No it won't melt the heat flex , the bulb's that is 24Volt2Watt don't get warm becourse of the low Amp thy use , temp aprx. 25 Degrees/50 Farenheit
Regards
Ben
#10
Senior Members
Originally Posted by lightfytr' post='753074' date='Dec 26 2008, 06:40 PM
Ben you are the man.