you need 5 posts to send a pm.

 

Ricky

the second one has one more connection to the LED , is that necessary?

 

I am from Hong Kong.
How are I get the lci cable? Is it come from the OEM lci light ?
Thanks

 

Hi Wman,

Please find below thread for DIY LCI cable https://5series.net/forums/topic/882...&#entry1041049

It would not come with LCI tail light.

Best regards
Ricky

 

For the members in Hong Kong, if you want it done, please try to contact AK thru 64989348 (after 3pm), he is more than happy to help (I am getting no commission out of this! )

 

I have a 2008 535, do I need the circuit board still? If not, can u pls explain one more time what materials are needed? Thanks

 

Really followed this thread 100 times....tried a set from one of your followers....and also asked my colleague to solder a set....same suituation:-

When i took out all four bulbs, error code....but all lights function as Ricky's effect. I tried and managed to put back each side one bulb at the outer bulb holder, then no error (If I put the bulb in the inner bulb holder, reverse light came up too, so I put back at the outer, if put back both, still got error).....In order to avoid error in i-drive, my case is funny and became a specail effect :-

Without light on - when brake, the outer bulb, led rods and fog on;
With light turn on - without brake, outer bulb on, led rods on;
when brake, outer bulb on, led rods on, fog lights all on!

In all cases above. turn lights and indepentant fog light get no problem. I tried all 20w 20, 22r, 25r power resistors.....lights bulb in place, no error, take out bulb, error.....need to try other watt resistor?

Photo shows - turn light on without brake, outer bulb on, led rods on.....

 

any one willing to make one set of these for me if so how much thanks

 

Is this only for LM2? or will this work with LM1?

cheers

 

i just finished my conversion with a LM1, i will post some details and pics after! cheers!