hi has anyone fitted this backup cam to there car.it is fitted into the trunk release on trunk lid above number plate,between n/plate lights. http://www.doseongms.com/product/det......=1&keyword=

if you can help in the wiring please pm or email me.
the main problem is what is the stereo jack plug connected to .a little strange as it is prewired for the e60 /e90 and assuming it to be plug and play as there are connnections on the cables ends that dont seem to be correct?

 

I cannot access this Korean website.

 

Try
http://www.doseongms.com/

I also have the same camera, radioham, please share your findings and any feedback you get. I also have the Navtogo unit from Dom, I will try to set up this back up camera with that unit

 

There is no picture of E60 in their gallery. Also, no price info of the camera and the video interface module. How can we compare this interface module with the one from NavTV, etc.

 

trhe picture is there for all models and the nav unit is the same with controller you email for prices.maybe you have not set your browser correctly to view website.try again

 

Pictures were there to show different cars, however, for BMW, they only showed the 7-series. No E60 (5-series) picture is shown there, double check for yourself.

 

Is this a different rear view camera then the orginal BMW ?

I did install the original BMW in conjunction with the ACM module and it works great.

 

all points notied,yes picture only 7 series but the unit is aftermarket specific to e60 and e90.just curious to see if anyone has used /purchased this unit hense the post.
i ghave no installation instructions with the unit so i will have o explore the circuit and before i commenced fit i wanted to get information/experiences from other users,so if you have fitted this and can help ..thanks in advance.
i will post photos so it will expain the wiring and connections that are attached,i expected it to be specific for car with correct terminations etc.i have emailed the company but no respose as yet.

 

yes aftermarket.thanks but your connections that you used and where it fits maybe of use.this unit replaces the trunk release switch/grab assembly

 

I bought it from a forum member. Here are the pics he supplied.
I run a test and it works. I might be installing this soon.