Big "A" Detailing Ford F150 Clear Coat Correction 67 pics
#1
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Ford F150 Clear Coat Correction
Flex Orbital & Dewalt DW849 Rotary machines
Flex is the smaller black & red machine,
the Dewalt is the larger yellow one
hood & roof = rotary to compound + rotary to polish
the rest of the truck = orbital to compound + rotary to polish
Meguiars M105 Ultra Cut Compound - Orange pads
Meguiars M205 Ultra Finishing Polish - Blue pads
Einszett 1Z Glanz Wax
Black Jack Black Again
Black Magic Tire Wet Gel
1. johnny clay barring the roof
2. taping & all prep work done. johnny gets me a fresh 6.5" orange pad & places it on the windshield for me to use for compounding.
3. 3M 3/4" lime green masking tape is still the best
all black plastic moldings & quarter panel decals & a few badges were tapped up
4. sunroof & other roof trim tapped up
Flex Orbital & Dewalt DW849 Rotary machines
Flex is the smaller black & red machine,
the Dewalt is the larger yellow one
hood & roof = rotary to compound + rotary to polish
the rest of the truck = orbital to compound + rotary to polish
Meguiars M105 Ultra Cut Compound - Orange pads
Meguiars M205 Ultra Finishing Polish - Blue pads
Einszett 1Z Glanz Wax
Black Jack Black Again
Black Magic Tire Wet Gel
1. johnny clay barring the roof
2. taping & all prep work done. johnny gets me a fresh 6.5" orange pad & places it on the windshield for me to use for compounding.
3. 3M 3/4" lime green masking tape is still the best
all black plastic moldings & quarter panel decals & a few badges were tapped up
4. sunroof & other roof trim tapped up
#2
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
5. Compounding with the Flex Orbital
for all compounding & polishing i prep each pad with usually 1 but sometimes 2 pulls of the trigger on the water bottle. 2 spritzes but never 3. 3 would make the pad too wet & cause extra splattering of the products.
before use i wash each pad in cold water then put the pad back on & spin either machine on the maximum speed level to dry out the pad.
6.
7.
8.
9.
10.
for all compounding & polishing i prep each pad with usually 1 but sometimes 2 pulls of the trigger on the water bottle. 2 spritzes but never 3. 3 would make the pad too wet & cause extra splattering of the products.
before use i wash each pad in cold water then put the pad back on & spin either machine on the maximum speed level to dry out the pad.
6.
7.
8.
9.
10.
#3
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
11.
Polishing with the Dewalt DW849 Rotary
12.
13.
14. before bottom of the door
15. after bottom of the door
16. before top of the door
17. 50/50
18. after top of the door
Polishing with the Dewalt DW849 Rotary
12.
13.
14. before bottom of the door
15. after bottom of the door
16. before top of the door
17. 50/50
18. after top of the door
#4
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Compounding the hood with the Dewalt DW849 Rotary
19.
20.
21.
22.
Polishing the hood with the Dewalt DW849 Rotary
23.
24.
25.
26.
27.
28.
19.
20.
21.
22.
Polishing the hood with the Dewalt DW849 Rotary
23.
24.
25.
26.
27.
28.
#5
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
29.
30.
31.hood after correction
working on the roof with the Dewalt DW849 Rotary
orange pad is for compounding. blue pad is for polishing
32.
33.
30.
31.hood after correction
working on the roof with the Dewalt DW849 Rotary
orange pad is for compounding. blue pad is for polishing
32.
33.
#8
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
some more hood shots.
before correction
49.
50.
51.
after correction
52.
53.
54. clear coat inspected under 1700 total watts of halogen lighting
Black Again applied to all textured plastic moldings
55. 50/50 shot of a fender molding
56. 50/50 shot of a wiper cowel section on the passenger side of the truck
before correction
49.
50.
51.
after correction
52.
53.
54. clear coat inspected under 1700 total watts of halogen lighting
Black Again applied to all textured plastic moldings
55. 50/50 shot of a fender molding
56. 50/50 shot of a wiper cowel section on the passenger side of the truck
#10
Senior Members
Thread Starter
Join Date: Dec 2009
Location: BIG "A" DETAILING (718)445-9995 QUEENS, NY
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
sun shot on the fender
61.
sun shot on the hood
62.
63.roof
64.hood
65.
66.
67.
thanks to all of you that made it from start to end of this post.
the weather is nice & we are having a blast here at Big "A" Detailing.
now, how many of you were wondering how i got the truck down the driveway & into the shop. i told yall, everything fits here LOL!
-Andrew
proud owner of Big "A" Detailing, slave to the shop & loving every minute of it!
61.
sun shot on the hood
62.
63.roof
64.hood
65.
66.
67.
thanks to all of you that made it from start to end of this post.
the weather is nice & we are having a blast here at Big "A" Detailing.
now, how many of you were wondering how i got the truck down the driveway & into the shop. i told yall, everything fits here LOL!
-Andrew
proud owner of Big "A" Detailing, slave to the shop & loving every minute of it!