My E60 is pre-wired for BT...now what?

Reply Subscribe

Thread Tools

Search this Thread

07-26-2008, 12:25 PM

#11

ademitt

Contributors

Join Date: Dec 2004

Location: Calgary, Canada

Posts: 788

Likes: 0

Received 0 Likes on 0 Posts

My Ride: 2011 F10 535i, Graphite on Oyster, ///Msport, Executive Package, XDrive

The BTUM is intended to permit BT compatibility with the very early E60's. Essentially, it uses the cradle for the old CPT 9000 phone the only cradle that works with an 04 E60) and emits a BT signal using the docking mechanism in the cradle as the power source.

There is a very good chance that all you will require to enable BT in your car is software enablement of the function. Talk to another dealer.

Reply Like

07-27-2008, 12:27 PM

#12

akfirepro

Members

Join Date: Apr 2008

Posts: 143

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by littlebeeper' post='632105' date='Jul 24 2008, 09:18 PM

My service guy is ticking me off. I fall within this 03/04 to 09/04 build date. i also have confirmed that my TCU is the part number used during this build period. The 1st time i asked for bluetooth he said i needed some hardware for 300 to 400 dollors. i asked a few months later when i went in for a broken seat control and he said i need a $700 hardware part. i asked what this part was called. he said its the "BTUM or something" corrent me if i'm wrong but isn't then BTUM the docking cradle? and doesn't the SIB state that the docking cradle can't be installed due to wiring problems? Should i go and ask another service guy or what?

It is definatley possible. I have an 04/04 545i and just had it done. If you have BMW assist your car is already wired, no additional hardware required. It cost me $180 for the BT activation and another $75 because I needed a software upgrade to the newest version, not sure which one though. Many dealerships are unaware that this is possible, I had one quote of $2000 and another for $700. I know for a fact that Daniel, a SA at Cunningham BMW in El Cajon, CA is very knowledgeable on the subject. Not sure where you are but maybe a phone call to him and he could get you lined out with the exact work that needs to be done, GL!!