viper1213

hey everyone i just bought and installed a dension, i have not yet installed or coded the bluetooth. When using my navigation i noticed when searching for locations it has an option to call the place. Once i get my dension with bta coded will it work with my navi?

mandrsn1

Yes it is supposed to. I don't know how to get the coding done though. No shops near me have auto logic and I cannot figure out the programming on my own with NCSexpert

viper1213

im sure if you post it some of the more professional coder would be able to help you.

Sas

It's not the Dension that needs coding, BTA1500 plugs in slot #2 on the GW500.
CCC / M-ASK / CIC unit must be BT enabled, no need for the MULF.

Sas

CCAPL
TELEFON_TYPE_C08 set to mulf_phone
BLUETOOTH_NODES set to profil_2

Sas

Here you go

viper1213

Thanks for chiming in Sas is that for enabling bluetooth as well as the microphone? Will it allow me to use bluetooth without the dension? I just found out my car was prepped with bluetooth so i am going to code it this weekend.

mandrsn1

What other options for "TELEFON_TYPE_C08" may work? I tried these settings and i get the Bluetooth menu in iDrive, however, it still asks me to turn Bluetooth on in settings.

I am in the US if this helps.