spediegunz

It's more than likely you will need a newer bt enabled tcu I got mine off of eBay. Then just swap it with the one you have in your trunk. After that you will need coding done, dealers probably won't do it but you can always still ask or you can pay someone from the forum to do it or learn to code yourself. I tell everyone it's easy but not easy if you want it badly enough you can Buy the cable download the software read through a pile of threads and slowly but surely learn how to do it we posted the coding instruction for both cars with and without nav right on this thread. Good luck if you want a starting point about learning how to use the coding software head over bmwcoding.com and read the beginners lounge.

mrdunu

I have recently bought a second hand bluetooth TCU, and am now trying to add +k633 ,$639 and $605 to the VO (via NCS Expert)

Whenever I attempt to do so, I am met with the following error message:

ERROR! Modul: CVT_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 106.
TELEFON_TYPE_APP

ERROR! Modul: COAPI.CPP, Proc: coapiGetFswPswFromAsw, LineNr: 02, ErrorNr: 1000
COAPI-1000: error

Has anyone experienced such an error before? I have an 08/04 E60 525i with CCC Professional Nav

Steps to replicate error:
1. Load Expertmode profile in NCS Expert
2. Select CHASSIS (F2) and then E60
3. Select VIN/ZCS/FA (F1)
4. Select ZCS/FA f. ECU (F3) and select CAS
5. Select Enter FA (F2) and select E60. VIN number then prepopulates
6. Add +k633 into the Attribute field (the CHASIS field is already prepopulated with the value E60_)
7. Select OK
8. Select Back (F6) and error message appears

Any assistance would be greatly appreciated.

Thanks

EDIT: If it makes any difference, I previously had an aftermarket bluetooth module installed, however when clicking the Communications Tab within my iDrive, a "Telephone from other manufacturer installed" message appears.

Jaystyles

Hi is there anyone on east coast in the tri-state area that can install an aux cable and code my 7/2004 545i to enable bluetooth and aux??? If so please PM or reach out to me at Jaystyles@aol.com and we'll discuss the details....Thanks all.

Bugsy525

Imagine my disappointment when I check the production date on my 525i to see 02/04. So close yet so far away. No easy bluetooth for this guy

PaoChe

More on the hardware side of things, this is what I have going on in the trunk of my 03/04 E60. Is this all that is needed to hook up the BT TCU?

almandee26

I have an 2004 545i and just bought threw eBay a 2008 TCU in order for my bluethooth to work . I haven't install it yet cause once I do I have to reprogram it and my friend have the computer but his away for the next to week . Put will keep you updated with info once I install it .

mpower310

how do you know what TCU will work with your car? I am looking into doing this as well. I have a 04 545

cmyachtie

The TCU is located underneath the wheel well cover in the trunk, to the right of your DSC1175 pic, in my car (with TCU) that purple plug you are showing is connected.

Rizbel

I have an 02/04 built as well and have installed a 2008 TCU and so far has no luck activating Bluetooth. I also connected the purple plug as per cmyachtie. Please help!




Good luck with the project

bbbero

My 04/04 530i Aus delivered, so Euro spec, Doesnt have the bigger TCU, it has a smaller one laying flat next the storage box.
Even though it falls into that prod date range, it doesnt seem to have the BT TCU.
I checked the VIN and it says Preparation f tel.installation universal and preperation of Voice input system.
It has nav proffesional
Can anyone offer some guidance??