just DI-NOC'd my roof
Thread Starter
Contributors
Joined: Mar 2010
Posts: 254
Likes: 0
From: SoCal
My Ride: '04 545i
'02 SC430
'04 RX330
got some 3M carbon fiber vinyl from Don last week, enlisted my girlfriend's help and tackled the roof over the weekend.
this youtube video http://www.youtube.com/watch?v=HVKxbXINPdo&feature=PlayList&p=FC5AC201CD3 B5783&playnext_from=PL&playnext=1&index=9 was great... just followed along and all want fairly smoothly.
here are the pix
first, cut the vinyl a bit larger than the roof (the size i used was 48" x 63") and cut a slit for the roof fin. open your moonroof.
put a strip of tape near the back of the car.
tare off the backing on the back side first. align the cut slit for the fin then start squeegeeing the vinyl from the fin outwards.
take off the blue tape, flip the vinly towards the back of the car and start peeling back the adhesive. I did this part a bit differently from the youtube video as I only peeled back a section at a time rather than taking all the backing off. this allowed me to take my time and do one section at a time.
make sure to get rid of all the air bubbles as you go along. you can lift the vinyl to remove any creases. squeegy all the seams, then just use a blade to cut off the excess.
fortunately, it was quite warm when I did the roof so the heat from the roof and the sun was able to make the vinyl soft enough to work with. I did not need the heat gun (like shown in the video). Here are pix of the finished product
while I was at it, i also smoked out the red part of the taillight...
this youtube video http://www.youtube.com/watch?v=HVKxbXINPdo&feature=PlayList&p=FC5AC201CD3 B5783&playnext_from=PL&playnext=1&index=9 was great... just followed along and all want fairly smoothly.
here are the pix
first, cut the vinyl a bit larger than the roof (the size i used was 48" x 63") and cut a slit for the roof fin. open your moonroof.
put a strip of tape near the back of the car.
tare off the backing on the back side first. align the cut slit for the fin then start squeegeeing the vinyl from the fin outwards.
take off the blue tape, flip the vinly towards the back of the car and start peeling back the adhesive. I did this part a bit differently from the youtube video as I only peeled back a section at a time rather than taking all the backing off. this allowed me to take my time and do one section at a time.
make sure to get rid of all the air bubbles as you go along. you can lift the vinyl to remove any creases. squeegy all the seams, then just use a blade to cut off the excess.
fortunately, it was quite warm when I did the roof so the heat from the roof and the sun was able to make the vinyl soft enough to work with. I did not need the heat gun (like shown in the video). Here are pix of the finished product
while I was at it, i also smoked out the red part of the taillight...
Contributors
Joined: Oct 2007
Posts: 3,561
Likes: 0
From: Milky Way, Earth, N. America, CA, San Jose, 95136, Latitude N 37� 16.837, Longitude W 121� 50.461
My Ride: 2004 530i | Sapphire Black | Sport | Premium | NAV | Logic 7 | DPE R07 Variant S Gloss Black with Polished Lip 20x8.5 front 20x10 rear | Falken FK452 tires 245/30/20 front 275/30/20 rear | H&R Coilovers | Smoked Tail Lights | M5 trunk spoiler | AC Schnitzer style roof spoiler | HID 8000K headlights & foglights | 35% tint all around | Sprint Booster | Speed Innovation ECU tuning | M5 trunk finisher | M-Tech body kit | Remus Quad Exhaust | AC Schnitzer style pedals | Euro Stickers | RPi Ram Air Induction | Smoked LED Side Lenses | AC Schnitzer style e-brake handle | AC Schnitzer style shifter | AC Schnitzer style iDrive knob | AC Schnitzer style carbon fiber diffuser | carbon fiber hood/trunk/steering emblems | carbon fiber grilles | carbon fiber door pillars | MTEC v2 Angel Eyes | Hamann style carbon fiber splitter
wow! nice DIY..congrats
Thread Starter
Contributors
Joined: Mar 2010
Posts: 254
Likes: 0
From: SoCal
My Ride: '04 545i
'02 SC430
'04 RX330
Thanks for the kudos!
i've tinted taillights on my cars before, but have never done something this large. the material was actually very easy to work with.
i was lucky in that the weather was quite warm so i didn't need a heat gun. having an extra set of hands is also a must as this is definitely not an one-man job... will be tackling my interior next
i've tinted taillights on my cars before, but have never done something this large. the material was actually very easy to work with.
i was lucky in that the weather was quite warm so i didn't need a heat gun. having an extra set of hands is also a must as this is definitely not an one-man job... will be tackling my interior next
haha
Contributors
Joined: Sep 2008
Posts: 2,341
Likes: 0
From: SFV California
My Ride: 2006 530i Alpine White on Black interior, Sport and Premium Package, Steptronic, Navigation, Xenon Adaptive Headlights, Mtec V2.1 angel eyes,Hoen Fog Lights, Full M-Tech kit, ACS pedals, LED plate lights, CF Steering Wheel badge, CF Titanium trim, OE
you really know what your doin!!! the M5 fender grills and this!! awesome job
Thread Starter
Contributors
Joined: Mar 2010
Posts: 254
Likes: 0
From: SoCal
My Ride: '04 545i
'02 SC430
'04 RX330
"more pix of the GF? haha"
here she is in a dress and sexy red heels.. let me know if you like more
thanks for the compliments. i'm sure i'm just one mod away from going overboard. hum... maybe i should re-consider the pink caliper idea..lol....
here she is in a dress and sexy red heels.. let me know if you like more
thanks for the compliments. i'm sure i'm just one mod away from going overboard. hum... maybe i should re-consider the pink caliper idea..lol....
Contributors
Joined: Jun 2009
Posts: 2,799
Likes: 0
From: Los Angeles
My Ride: F90 M5 Singapore Grey Executive package blacked out grill, body matched paint
Model Year: 2019
hahahaaa