••ü•• Quad Exhaust for E60
#1
Former Vendor
Thread Starter
![Default](https://5series.net/forums/images/icons/icon1.gif)
Production will be released in mid December.
We have begun production already. All orders are pre-orders at this point.
Retail prices for the exhaust are $699, pre-orders will be $499 + shipping (shipping to be charged at a later date)
Pre-orders are on the phone, and as some of you know, sometimes shipments take a little longer than we expect, so we're putting the dates out a little longer than we actually expect them to arrive.
Below are some photos of the exhaust, dynos, and of course, the current video. As we have more time, we'll shoot more videos of this exhaust in drive by.
Each of these images can be expanded.
![](https://www.umnitza.com/albums/exhaust/E60exhaust.jpg)
![](https://www.umnitza.com/albums/exhaust/e60teaser.sized.jpg)
![](https://www.umnitza.com/albums/exhaust/e60teaser2.sized.jpg)
![](https://www.umnitza.com/albums/exhaust/quadexhaust.jpg)
Dyno:
![](https://www.umnitza.com/albums/exhaust/dynonumbers.jpg)
![](https://www.umnitza.com/albums/exhaust/dynoconditions.jpg)
Video:
We have begun production already. All orders are pre-orders at this point.
Retail prices for the exhaust are $699, pre-orders will be $499 + shipping (shipping to be charged at a later date)
Pre-orders are on the phone, and as some of you know, sometimes shipments take a little longer than we expect, so we're putting the dates out a little longer than we actually expect them to arrive.
Below are some photos of the exhaust, dynos, and of course, the current video. As we have more time, we'll shoot more videos of this exhaust in drive by.
Each of these images can be expanded.
![](https://www.umnitza.com/albums/exhaust/E60exhaust.jpg)
![](https://www.umnitza.com/albums/exhaust/e60teaser.sized.jpg)
![](https://www.umnitza.com/albums/exhaust/e60teaser2.sized.jpg)
![](https://www.umnitza.com/albums/exhaust/quadexhaust.jpg)
Dyno:
![](https://www.umnitza.com/albums/exhaust/dynonumbers.jpg)
![](https://www.umnitza.com/albums/exhaust/dynoconditions.jpg)
Video:
#2
Former Vendor
Thread Starter
![Default](https://5series.net/forums/images/icons/icon1.gif)
For the Dyno numbers, the car is plain stock. Has 25K-30K on the clock.
Dyno was done at Dynospot Racing - great place ask for Dick Chiang.
Dyno was done at Dynospot Racing - great place ask for Dick Chiang.
#3
Contributors
Join Date: Feb 2008
Location: Fullerton, CA
Posts: 4,074
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
do you know what the base dyno number were? because if you only have the 'after' dyno it is pretty much useless.
is it a full exhaust or axle back only?
thanks
is it a full exhaust or axle back only?
thanks
#4
Former Vendor
Thread Starter
![Default](https://5series.net/forums/images/icons/icon1.gif)
Stock dyno was about 5-9HP below that, didn't save the dyno numbers.
The car is an auto, so figure 18% drive loss, that puts the HP at about 230 with the 195 figure and 234 with the 199 figure.
If you figure 20% drive loss, then the HP figures are better.
Also, along those lines most stock 530i have dyno'ed in the 185 range on the same dynojet, obviously different conditions and what not, but this speaks favorably.
The car is an auto, so figure 18% drive loss, that puts the HP at about 230 with the 195 figure and 234 with the 199 figure.
If you figure 20% drive loss, then the HP figures are better.
Also, along those lines most stock 530i have dyno'ed in the 185 range on the same dynojet, obviously different conditions and what not, but this speaks favorably.
#6
Former Vendor
Thread Starter
![Default](https://5series.net/forums/images/icons/icon1.gif)
We will be offering a special combination shipping deal with the M5 Rear bumper and this exhaust for $300 shipped for the rear + this exhaust will be free shipping with the rear bumper. So total price would be $499 + 300 with free shipping.
#9
Senior Members
Join Date: Nov 2008
Location: OC, SoCal
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '05 545i SMG, 35% Tint, LED Angel Eyes
![Default](https://5series.net/forums/images/icons/icon1.gif)
Will this setup fit an OEM M-TECH quad opening? How about the fitment for a 545i? Will the pipes and mufflers be adequate to handle the V8?